ryebred Posted November 20, 2010 Posted November 20, 2010 I have two CCR's which I have made into four arches in my display. I had everything planned out and completed 11 sequences with those CCR's. Now I went to set them up outside today and realized that the CCR cords are not long enough to reach the controller box I am housing both of them in. So, I had to reverse the first CCR so that pixel 1 is now on the right and pixel 50 is on the left. Is there a quick way to reverse the CCR in my channel configuration? I could have sworn I once saw a setting where you could set whether it went from 1 to 50 or 50 to 1. Maybe I am imagining things?
ItsMeBobO Posted November 20, 2010 Posted November 20, 2010 There is no reverse. I made a post requesting a HU option for this about a year ago.It might me easier to get another box to house the controller in !One idea to use the Channel property grid to set each rgb channel set to what you really intended.1 to 1482 to 1493 to 1504 to 1455 to 1466 to 147all the way down. Don't rename the channels. Logically the left side is still going to be your 1st channel even tho its the last. You will not need to change any timings at all. Now export and import to the other 10 sequences. Make backups!If you are using macros be sure to set your color in the real 1,2,3 which will be labeled 148,149,150
ryebred Posted November 20, 2010 Author Posted November 20, 2010 Thanks. I changed all 50 pixels and exported the configuration to all of my sequences. Everything plays correctly in the animator. Tomorrow I will test it out on my setup outside.
Dale Gannon Posted November 20, 2010 Posted November 20, 2010 Hi there, Is there any chance of sharing any sequences with me as i lost half of my data when my computer crashed! Your Help is appreciated!
Recommended Posts