mike carlson Posted November 13, 2010 Share Posted November 13, 2010 Hi There ..Is anybody aware that the user guide for the CTB16D (Green Board) is not avail. on the Web site for Datasheets/user Guides, The link button is green and when I try to download I get an error message about a corrupted file.. The blue user guide button is for the Datasheet only. I have no problem with any other file or download. Is there an alternate location I can retrieve this file??Thanks..Mike.. Link to comment Share on other sites More sharing options...
JBullard Posted November 13, 2010 Share Posted November 13, 2010 mike carlson wrote: Hi There ..Is anybody aware that the user guide for the CTB16D (Green Board) is not avail. on the Web site for Datasheets/user Guides, The link button is green and when I try to download I get an error message about a corrupted file.. The blue user guide button is for the Datasheet only. I have no problem with any other file or download. Is there an alternate location I can retrieve this file??Thanks..Mike..The Green link button is to download the FIRMWARE for the Green board.The user guide is the same for both the Green board and the Blue board, they just have a few different components due to a manufactiring change one year.Set up and operation is the same.Use this link for the user guidehttp://www.lightorama.com/Documents/CTB16D_UserGuide.pdf Link to comment Share on other sites More sharing options...
mike carlson Posted November 13, 2010 Author Share Posted November 13, 2010 Hey!! Thanks John for your help, I now have a user guide to complete the wiring of my newly built controller.. Seems kinda strange that the “User Guide” link points you to the firmware download, why don’t they just say so in the first place??? Oh Well, somebody must be on very good drugs, or has sick sense of humor JJ After initial testing of the controller, I will be needing a firmware update anyway.Thanks again..Have a good one..Mike.. Link to comment Share on other sites More sharing options...
JBullard Posted November 13, 2010 Share Posted November 13, 2010 mike carlson wrote: After initial testing of the controller, I will be needing a firmware update anyway.Mike,The firmware on that page is only 4.30.From your Hardware Utility, click on the Firmware tab, and browse the list. If your S2 software is current, you should see firmware 4.32 Green that is more current.If this is a new board that you have, it may have firmware ver 4.40 already loaded. If so, then do NOT change it. Link to comment Share on other sites More sharing options...
mike carlson Posted November 13, 2010 Author Share Posted November 13, 2010 Hey John..After a successful build and test of this CTB16D green board, firmware is already sitting at 4.32, so it looks like were ready to go.. Where do I find Ver. 4.40 ???Thanks..Mike.. Link to comment Share on other sites More sharing options...
JBullard Posted November 13, 2010 Share Posted November 13, 2010 mike carlson wrote: Hey John..After a successful build and test of this CTB16D green board, firmware is already sitting at 4.32, so it looks like were ready to go.. Where do I find Ver. 4.40 ???You can't, some boards made in 2009 and later have a different microprocessor chip on them and came preloaded with Ver 4.40.All other boards use the 4.32 firmware Link to comment Share on other sites More sharing options...
mike carlson Posted November 13, 2010 Author Share Posted November 13, 2010 OK!!! Thanks for your help..Mike.. Link to comment Share on other sites More sharing options...
Recommended Posts