Jump to content
Light-O-Rama Forums

Controller Mounting - Locking Tote Bins?


ryanblazer

Recommended Posts

I have 2 CTB16PC that I built this past summer.

My question is where do you find the locking tote bins to mount them in & how much do they cost?

I will also house my mp3 director & fm transmitter (antenna coming out of the box).

I plan on cutting a hole in the bottom to allow the cables to run inside & raise it off the ground with scrap 4x4 to create "legs" if you will.

Link to comment
Share on other sites

The best place I have found for enclosures is the Broadband Store, These enclosures have ample room for the controller and wires and will also house a DC controller and power supply. The enclosure are plastic, weather proof, and have a pad lock loop. I just bought 7 at $9.24 each (Delivered was $92.00)

Link to comment
Share on other sites

I am sorry, I mispoke...

I have the boards enclosed with PC enclosure, but I want to mount the PC enclosure cases within a locking tote similar to the one below, but not upside down. I will cut a hole in the bottom.

attachment.php?id=12099

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...