smitty77 Posted October 26, 2010 Share Posted October 26, 2010 One of my controllers when I check it out in the hardware utility shows its number and between 5 and 7 more controllers although it isnt connected at all to any of my other controllers. I've upgraded to the latest version of the software, Anyone else have this issue before? Link to comment Share on other sites More sharing options...
LightORamaDan Posted October 28, 2010 Share Posted October 28, 2010 This is generally caused by some type of noise on the comm line. It can be a connector on the card and/or the CAT5 cable.Also it could be that the controller needs to be reset because it is running a standalone sequence and is messing up the network. Try a reset and see if that helps.Dan Link to comment Share on other sites More sharing options...
friskybri Posted November 7, 2010 Share Posted November 7, 2010 I just had the same issue. the first 5 worked but something was making all the lights go haywire. I swithcied out 2 cat 5 cables before it stopped. WOW need to order more cat 5 now. Link to comment Share on other sites More sharing options...
Recommended Posts