Donald.Landru Posted October 24, 2010 Share Posted October 24, 2010 I have a CTB-08D that has not been in use for a couple of seasons. I pulled it out today as I am going to use it this year.Fired up the Hardware util set all channels to on and am only getting 7.6 volts on the outputs. I have 121 AC on the input and on the load side of the fuse.I tried each channel individually on and still the same 7.6 ~ 8.1 I also noticed when the channels are turned off there is still about 1 ~ 2 ac on the output not sure if that is normal or not. Link to comment Share on other sites More sharing options...
Anthony in Houston Posted October 24, 2010 Share Posted October 24, 2010 Are you checking this with a volt meter without any lights connected. If so put a string of lights on it and then try.Anthony Link to comment Share on other sites More sharing options...
Donald.Landru Posted October 24, 2010 Author Share Posted October 24, 2010 Anthony, Yes I was checking with a voltmeter without a load... I think the brain skipped a beat there. All channels are working. ThanksDonald Link to comment Share on other sites More sharing options...
Recommended Posts