sheldonmcdonnell Posted October 21, 2010 Share Posted October 21, 2010 Hello,I have a new 16 channel controller and am having issues. I hooked everything up and everything was working great for about 5 minutes. Now I cannot get anything to work with my PC. The status LED does not come on if it is connected to the PC or not but the lights connected to the cordsets do work. Any idea on where the problem might be? I am thinking I may have a solder joint that went bad. Thanks for the help! Link to comment Share on other sites More sharing options...
Victory402 Posted October 21, 2010 Share Posted October 21, 2010 Do you have a blue square in the lower right hand corner of the sequence editor window? Thats assuming you are runing your lights using the editor. Link to comment Share on other sites More sharing options...
sheldonmcdonnell Posted October 21, 2010 Author Share Posted October 21, 2010 Hello,Thanks for the help but I figured it out. The microprocessor had come out of the socket. Thanks again! Link to comment Share on other sites More sharing options...
Recommended Posts