dominic Posted October 11, 2010 Share Posted October 11, 2010 Looking for an idea for hanging lights around windows with out using staples. I have wood around the windows. Any help? Link to comment Share on other sites More sharing options...
bisquit476 Posted October 11, 2010 Share Posted October 11, 2010 http://www.thewindowwonder.com/ Link to comment Share on other sites More sharing options...
Dan Ancona Posted October 11, 2010 Share Posted October 11, 2010 I created a window box from 1x4 that is friction fit into my windows. I have a brick exterior. I simply intall the box which has 3 color minis and use a length of floral wire at the top fed inside the top of the window to help hold in place. Attached files Link to comment Share on other sites More sharing options...
Dan Ancona Posted October 11, 2010 Share Posted October 11, 2010 picture of esterior window frame Attached files Link to comment Share on other sites More sharing options...
TJ Hvasta Posted October 12, 2010 Share Posted October 12, 2010 Use 1/2" pvc and elbows.. make the legs a tiny bit bigger (like 1/8"-1/4") than the window opening, zip-tie your lights to the pvc then friction-fit the pvc frame inside the window opening (edge of the brick). If you dont glue the 90's, it will break down easily for storage. Link to comment Share on other sites More sharing options...
RaceMedic Posted October 12, 2010 Share Posted October 12, 2010 What size bulbs are you using ?!I am doing windows with C9 bulbs .... http://www.pbase.com/dgeall/windowsI will need to drill 4 small holes in the corners but they will be plugged after the fact with silicone.Dave Link to comment Share on other sites More sharing options...
Recommended Posts