Donald Sallenbach Posted October 9, 2010 Share Posted October 9, 2010 I have a LOR1602mp3. When I turn it on the leds chase 5 timees. When the sd card is installed the led showed that the dc-mp3 is waiting for the show to start. The show ram as programed but after the show was complete the red led came on solid with the green led blinking twice. I used hardware ver2.7.6 to program the card. What is this light telling me? Link to comment Share on other sites More sharing options...
LightORamaDan Posted October 10, 2010 Share Posted October 10, 2010 It is interesting that the Green ("P" far right one) blinked. It is directly connected to the power so that inidicates that there was a power glitch of some kind.The Red one will sometimes stay on at the end of the show and usually indicatest that there was a LOT of activity at the end of the sequece and things started to fall behind by more than 1/10 second. That is what the E led (far left) indicates during the play of a show. Now in some cases if the show ends with the E led on it does not go off. This is a display issue only and we will fix it in a subsiquent firmware release.At the end of the show the amber LED should go back to the waiting blink and if so you are okay...Dan Link to comment Share on other sites More sharing options...
Donald Sallenbach Posted October 10, 2010 Author Share Posted October 10, 2010 Thanks for the info. I was wrong about it being the green light, it is the amber light blinking, with the green and red on solid. Sorry for the confusion on my part. I am just learning how to use the controller. Link to comment Share on other sites More sharing options...
Recommended Posts