sthobe Posted October 3, 2010 Share Posted October 3, 2010 Was trying out the sequence every thing was fine and then one controller kicked off.It was dark so I figured it was probably a fuse and would relplace today. The fuse is fine tried and it worked on 9-16 and took the fuse in 9-16 and it failed in 1-8 even tried switching power cables but 1-8 will not work.The controllers are mounted to my house and would be a pain to bring inside but( it is what it is)any suggestions Link to comment Share on other sites More sharing options...
Fabian Posted October 3, 2010 Share Posted October 3, 2010 What model controller is this? Have you confirmed (using a volt meter or something similar) that you're getting power to the lower bank?Fabian Link to comment Share on other sites More sharing options...
Max-Paul Posted October 3, 2010 Share Posted October 3, 2010 sthobe,Aint nothing going to get people upset with you faster than you posting the same question in about a dozen different places. You have an active thread going on in the newbie section with the same question as here. I think you did this the other day with a different question and Dan killed on of them.Post in one place and stop bouncing around to different sections or creating a 2nd thread with the same stuff in the same section.Just calm down. You are going to get help. But just calm down some and focus.. Link to comment Share on other sites More sharing options...
Recommended Posts