Firefly, RGB, and 2.8.8

[Denny]

For those of you with the Firefli, how are you setting up the Firefli in 2.8.8? In the Channel Property Grid, are you assigning it as RGB Channels and regular LOR controllers? Also, I like to keep the Firefli on a separate network, but the network selection in the channel property grid is grayed out and the default is "Regular." How do I get in there to change it to a different network such as Aux A? I can't seem to remember how I did this with the original S2 version.

Edit: Playing around, the only way I can seem to change the network is in the individual RGB Channel Settings and not through the Property Grid.

Edit #2: Am I correct in assuming that in the RGB Channel Settings, I have to select "Use LOR Legacy Mode" rather than "Automatically Link Channel Settings"?

[JonB256]

I right click on the last channel, then choose Insert Device Below. In that list, I pick RGB (non-CCR), then say 16 channels. In the Add Device window, choose "Sequential", set the Base Unit ID, choose your Network (Regular, A, B or C), set channels to 48 and Channels per ID to 16.

Click OK.

I did not check either the "Link..." box or the "Legacy LOR.. "

No, you can't seem to change the Network setting in the Tool - Channel Property Grid. Greyed out.

[JonB256]

This will be in contrast to adding my 10 RGB floods. They will be created as "Triples" not "Sequential"