Jump to content
Light-O-Rama Forums

LOR 1602W firmware - upgrade ?


GS

Recommended Posts

I have 23 controllers.

Each year, b4 I put them out I test each one and check/upgrade the firmware.

Just the way I do it.

Link to comment
Share on other sites

Firmware before 4.30 does not recognize some of the newer commands, such as fading twinkle, and others.

I would recommend upgrading to at least 4.3 to get the full effects of the software on your controller.

Link to comment
Share on other sites

I'd take a walk or eat a bag of popcorn to relax before you begin upgrading. The controllers are more sensitive than you might believe and I wouldn't personally take the chance that they would pick up on any unnecessary apprehension while undergoing such a delicate operatrion. Better to be safe than sorry, eh?

Link to comment
Share on other sites

Its not rocket science.

Connect only one at a time and do the upgrade. If you do something wrong the H/W utility will let you know.

Confirm each upgrade doing the refresh button again and then do the next controller.

Set your MAX ID to just cover your number on unit addresses. tTat way you do not do a lot of searching in the refresh.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...