Jump to content
Light-O-Rama Forums

Communications question


testraub

Recommended Posts

Although technically not a daisy chain. And depending on distances. It very well may work. If you use the USB458B adapter, the adapter has 2 outputs for the LOR network, would be a better option.

There is only one way to know for sure. Do a mock set up and try. Will you harm anything by trying. Most likely NOT.

Chuck

Link to comment
Share on other sites

it would work either way either use both outputs on the usb485b adapter or use a repeater or an easy light linker could also provide two ports

Link to comment
Share on other sites

Yes it will work, I don't think LOR fully supports that layout, but It does work, as I used a very similar layout last year. (I used Phone (RJ11) from the computer to the 1st controller, and then cat5 going to the 2 other controllers in a T like you have.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...