Tim Herberger

RIP Robin... Wow, just watched some of the videos, it's been years since I saw them, Great Display!

The fuse holder is shot! I have had many of those fuse holders go bad, the cap holds the fuse too tight and does not allow the spring in the cap to push the fuse down on the bottom of the fuse holder. This creates a loose fit in the holder and arcing occurs causing heat build up and melting the bottom of the holder. Sometimes it melts just enough to cause there to be no connection but I have had one melt completely in two. I have spare holders that LOR sent me years ago for just such an occasion and after going a couple years with no problems I had one melt just last week on our Mega tree. I

Double post

Very nice set up! Weather willing, I hope to get my mega tree pole set up this weekend. Your star looks very familiar! It sits atop a 33' mega tree as well.

Looks like Kevin and the gang got everything worked out with the city! https://m.facebook.com/CreativeLightingDisplays?fref=ts&_rdr

Did someone say popcorn!

Twin 70' Mega's here. http://www.downsfamilychristmas.com/index.php

Chuck is an instigator!

How does that go over with the Air Traffic Controllers?

We had a pair of CCF's at C3 on Labor Day weekend, for testing.

Looks good so far but just wait until your wife goes to use her favorite cutting board!

If you haven't experienced a C3 yet, you're in for treat! And if you've been to one before, you know how much fun it is! We’re working hard so that you don’t have to! C3 is brought to you by, in part: Creative Displays - http://www.creativedisplays.com/ Christmas-LEDs/Suprtec Novelties, LLC - http://www.christmas-leds.com/ ChristmasLightShow.com - http://www.christmaslightshow.com/ Displays in Motion, a Certified LOR Partner - http://www.displaysinmotion.net/Holiday Coro - http://www.holidaycoro.com/ Holiday Technologies - http://www.holidaytechnologies.com/ Light-O-Rama - htt

I have the same issue when using xLights. To control the E681 when it is plugged directly into the computers ethernet port I have to disable my wireless card first. I was hoping it was just an xLights thing.... I too, will be watching and waiting for a solution.

So I shouldn't set mine to unicast then?

Registration is now open for C3. Hope to see you there! Click the link! http://chicago2012.constantlychristmas.com/index.php