Paul M Krupa

Hi all, I would like to put multiple CCR controllers in an enclosure and plan to go with a single larger power supply. What is the name of the fitting that plugs into the CCR controller and is there a place to get pigtails with that fitting preferably 90 degree? Thanks, Mike

Got 2 PC cards CCR's all gone!

So I guess you need to start with a video card with 2 video outputs? My desktop is due for some upgrades could someone make some suggestions for video cards? Thanks, Mike

I plan to get a flag from Holiday Coro for my first 4th of July endeavor hopefully this year.

I have stayed at the Comfort Inn a couple of times, a little small, was clean, but all I did was sleep there but they had breakfast that included bisquits and gravy eggs sausage bacon as well as cereal etc. Mike

I had some jumpy sequence problems adding ram to my show computer smoothed things out for me.

I have a ticket filed with LOR and they said to basically try to flex the ribbon at the problem joint till it works and secure it there to get through the season as is probably a weak solder joint. Will send for repair at the end of the season.

I have CCR's for my leaping arches, during my testing week I had one that about 1/3 that stuck on. I got it to go out by pushing reset on the controller while power on(had to do it several times). Seemed to work fine till last night when I went to check stuff after shut down and the same one had the same 1/3 stuck on. I pulled the power plug till this afternoon when I got it to shut off with the reset power on trick, thought everything was OK till I came home tonight. The problem CCR was working except for the 1/3 that was formerly stuck on.....nothing. Everything shutoff at shutdown tonight.

Don, Thanks for the input had to reset it three (3) times to get it to take(maybe the first 2 weren't long enough?) but lat time I looked it was working fine. Mike

Previous tests of my CCRs went well. Today I tested with everything and one CCR has about one third lit all the time unplugging cat5 makes no difference unplugging power it (CCR) goes out but goes back on when plugged back in. Will try reset button with power on tomorrow.

What size lights are you using? I use C-7 and mount them in vinyl "J" Channel, check out bazillion lights. I think that is where I fond out how to use the "J" channel. Mike

Remember it all comes down to the numbers us the Kill-a-watt for your application. I am mostly LED and am assembling boxes with multiple PC boards, and have one box with six boards run on one input cord.

Thank you to Mark, Kevin and Nancy as well as all presenters and vendors as well as all who attended, made for a great time! Thanks again, Mike

Got every thing I wanted more controllers and CCRs........ahh oo more work Dhoo

Mark, I plan on attending and can be there on Friday afternoon to help setup. Mike