Bcspy

Awesome

Keep on researching for a good projector and still confused. I have a two story with one street light. I should be looking for a short throw, 2500-3000 lumens, WXGA = 1280 x 800 WUXGA = 1920 x 1080, and at least a 1080p. But there are so much company. I see Optoma, Infocus, BenQ, Epson, NEC. They are all around $600 plus. How would I know which one is a good one. Sorry for the dumb question.

You was clear. Very good write up. I just have to do more research and playing with the S3. Should we invest in a good short throw projector with a high lumen or buy a cheap one on ebay.

Thanks Charles, for sharing to the world and that's a lot of hard work. For us newbies, this project will give us headache and once finished. It will be worth it.

From researching, the background can be shower curtain, disposable table cloth, and mosquito netting. I'm using the Cyberlink Powerdirector 13 for this first year. Cyberlnk currently have a 75% off special for $60 with free holiday and travel effects.

Thanks. I'm going to find a 3000 lumen Optoma or Epson short throw projector. Research on a timer and find a way to use both LOR and projector. Would turning on the projector from 6 to 11 everyday will heat up the system.

Really want to get into using projector mapping for Christmas and Halloween. I want to project the entire house. I just ordered Cyberlink Powerdirector 13 for the software. Now need a projector. Not sure what brand and type to get. What is the minimum Lumen, and distance to project? Can I use Light O Rama to start the show or will I have problems. I would like to place the projector by the carport/mailbox area by the sidewalk. Any advice would be great.

Two hours later and now working. Very stressful. Friday is coming around the corner. I ordered another USB485B and the G3- MP3 just in case for backup. Thanks again.

Forth year using LOR setup. All lights are up. This year, computer unable to read the controllers. I check the help site and install the driver. Still the red lights is blinking and not steady. Computer on comm 3. When refresh and unable to read. Computer keep saying check controller power. Do you think it might be the USB485B is bad and need to be replaced?

Thank you so much. It was uncheck. Stress level juct went to zero.

Just got a new HP Laptop with window 7. I open up the IMS project file. I then open the completed visualizer file. I then go to preferences and click visualizer preferences. I then go to visualizer file and click Simulation mode. The bottom USP Simulation active on is the same as the preference number box on the IMS project file. The screen show the background and will not play the props or fixures. What am I doing wrong? I'm using 3.11.2 Advanced. Is there a setting I don't know about.

Check email. No found. Maybe its my email. Can you resend to Nightprowler4497@gmail.com Thanks

Can I get a copy. Thanks always. Bcspy@hawaii.rr.com

What a great video. Thank you for showing the great side of my home. Aloha Have a great New Year.

Anyone use a guest book with your display? Any pic and how do you waterproof it. Is it really worth it to have one?