Jump to content

sysco

Members
  • Posts

    257
  • Joined

  • Last visited

  • Days Won

    9

Everything posted by sysco

  1. http://store.lightorama.com/ex12vo3pinbl1.html can anyone tell me which is the positive wire and the negative wire and the ground wire just want to be sure thank you
  2. Well I use lor strips never had a problem here on the east coast, Sydney But I have never heard this topic mentioned on this forum can't recall Blair
  3. anyone have any extra you are not going to use need 40 ft Not able to buy it here by the foot in Canada thank you Blair
  4. sysco

    ccr's

    looking for older ccr's if you have any that you are not going to use let me know thank you Blair
  5. not a good Idea to use global shipping it's a money maker for ebay and paypal not good for the buyer Blair
  6. have not used 2811's, wondering if all the ws2811's are the same color wise, and if one burns out will the others stay lite , and the best place to buy thank you
  7. What I do and have done since I had them is roll them up put back in original boxes stored in a plastic create in the basement no problem at all Blair
  8. you can purchase 6803's off ebay but they will be RBG BUT there is a way to change the order in S4 to RGB there are a few sellers in the U.S.A .Look at this video https://vimeo.com/260152106
  9. Earle just like to say thank you for all the sharing you have done over the past years and never refused a request for your sequences it's people like you that have helped me stay in this hobby Best of luck to you and your wife
  10. Came across these today https://www.toolclip.com/index.php/gripper-clips
  11. unplug power from the 150 controller ,leave the strip connected to the controller, hold down the blue button on the back of the controller reapply power plug to controller should run through red,green,blue if there is a problem with the pixel it should show up in testing just a thought
  12. Jerry have sent money let me know that you received it Blair
  13. Does anyone know if he has a pay pal account. i f you send it as a gift they wont take anything off it is this true Blair
  14. what you said is true but I for got to mention that I purchased these from lor looked but found no information on them in their store thank you for your reply
  15. I bought the 3 pin 10ft extenders for 12v pixels can anyone tell me the orientation of the three pins I think the white marked on the outside wire is ground single pin the one next to it I think is data and the other out side one is power is this correct thank you Blair
  16. sysco

    PIXCON 16

    Orville thank you Blair
  17. Just bought the pixcon 16 from lor going to upgrade to S4 do I need another router for this to work or can I just use my original router which has 2 extra ports open thank you
  18. sysco

    pixcon 16

    Ok I should have asked you before I bought it this pixcon stuff is new to me thank you Blair
  19. sysco

    pixcon 16

    just bought one in the summer sale it has no dip switches and it is a pixcon16 mkll v1.0 what would the numbers be on the board you have thank you Blair
  20. what is the latest version for the pixcon 16 does it have dip switches thank you
  21. sysco

    pixe con16

    Phil thank you for your reply Mike yes you are right Pixcon Blair
  22. can you switch this board to 12 volt or is it just 5 volt
  23. Ok, Mike thank you for your reply
  24. On ‎13‎/‎04‎/‎2018 at 5:41 PM, sysco said: just went back and looked at my order it's telling me pending review anyone else get this can anyone tell me what this might mean , do I have to open a ticket or call them ??
×
×
  • Create New...