
sysco
Members-
Content Count
397 -
Joined
-
Last visited
-
Days Won
7
Everything posted by sysco
-
way to go Orville ha ha good for a Monday morning thank you
-
anyone heard of anything new from lor this year ????
-
thank you for your reply
-
i'm testing a set of strings 2811 and what is happening holding the probe on the 12volt side both endsi get a beep now everything is ok for that side but i made a mistake left the probe on the 12volt side and tested the ground got a beep i'm i right in saying that the string is no good
-
the ducks thank you for your reply very helpful
-
Thank you would be helpful the pixie 16 is a lor board
-
Any videos or directions on how to hook up one 50 amp power supply to a pixie 16 for both banks thank you Blair
-
thank you for the information very helpful just wondering about spacing, question answered Blair
-
I hate to give up on the ccr's . i guess i'll have to go with pixels for a smaller tree rather than the ccr strips. what about appearance the ccr's seem to be more clear than pixels when using faces ect. just basing it on what i saw on some videos it doesn't seem really clear. what are your thoughts on ccr's vs pixels thank you Blair
-
i have a 17 foot 12-old ccr-150d tree would like to cut it down to 12 foot tree getting to hard to manage putting it up and taken it down I would have to cut the strips no problem there just wondering about the sequences what would i have to do to adjust them to the 12 foot tree any ideas thank you
-
thank you for the information Blair
-
So windows is good to use only want it to unzip files sent from people using the lor forums also what are .rar files and are they used often to send lor files thank you for your replies
-
what do most of the people here use to unzip a file free download or should i buy win zip thank you
-
Hard thing to look at not a good feeling at all i don't use guide wires i have 2'' x 20ft ratcheting straps in the back of the tree and 2x 1'' in the front of the tree can make adjustments easily, you can still see it no interference ,the stakes are 3 feet long with a 1/4 inch plate welded to the side of the stakes with a hole for the hook plus 4 handles welded to the tree itself for attaching upper hooks then there is a plate 1/4 x2 feet with a 14 inch 1'' heavy duty pipe welded to the plate also welded to the plate are 6- 1''nuts with 12'' stakes driven into the ground have no
-
use 1-1/4 black iron pipe no splices or threads at all you will never have a problem with it i did what you did 7 years ago learned my lesson thought it would be easier to put up and take down it came down easier ha ha
-
on page 8 under Status Led's Heading it is saying Power light Off Status light Off then it saying STATUS under Status it is saying read belos looking in manual v1.7 Board is not powered or the logic fuse is blown this logic fuse according to the manual is 0.5 amps but where is it located i have a piixcon 16MII V1.0 I don't see at alll does it exists ?????
-
I don't see A ---- .5 amp fuse on my board if they couldn't answer him i don't know i was just trying to show him where it might be if he had an older board
-
it is marked the same as the other fuses are 4amps and this one is marked 3 on the top of the fuse
-
what i have is bank 9-16 power connection then Fan Out after that is Fan Fuse 3 amp Yes it is, just wondering if they did away with it same color dark blue or mauve but 3 amps i think it was suppose to be for an external fan
-
i googled it and that's what came up i'm looking at my board and i do not see a.5 amp fuse on my board i see a 3 amp fuse marked fan fuse the board i have is pixcon16 mk11 v1.0 can you show me where the .5 AMP fuse is and i do have the manual but in that spot is the 3 amp fan fuse thank you
-
https://manualzz.com/doc/6540193/pixcon16-e1.31---light-o-rama look on page 8 but this seems to be for an older version ???? check with MR P OR JRDIBBLER ON the forums here
-
THAT'S really cool only in Gander leave to the people on the East Coast great place to visit
-
thank you for your reply Blair
-
Orville i tried it with the sequence running it did not work it showed me what was wrong thought just finished putting the media file to the sequence played it back and it has a slight freezing and then it will jump quickly to the next cells to catch up doing this on the four sequences and ideas how to fix this thank you
-
that's it right on the money i copied it from my old computer to the new one thank you very much for sharing your knowledge it's good to know you are willing give of your free time to help others it's people like you that keep this forum going Blair