J_Plak

I been using EL wire for years, I did not set this up last year....http://vimeo.com/8658431

you will need one of these AT3031 DMX address writer for setting the dmx address: http://www.aliexpress.com/store/product/AT3031-DMX-address-writer-for-setting-the-dmx-address-of-AT-series-dmx-decoders-drivers/701799_578769983.html and some-info 1. Connect dc power to the flood - most likely pink & black wires 2. Cut the ribbon connector supplied with the programmer, and connect the 3 wires to the right of the programmer to GND, DMX+ and DMX- (there is a label on the back of the programmer). You don't need to connect the SOUT wire. (in my case, I use black 3-core waterproof connect

Same Hear hoping that the introduction of LORNet doesn't eliminate their support for e1.31.

An error occurredYou have reached your quota of positive votes for the day!!! Matt and Sean thanks, good news for LOR in that they get the great architecture of xlights to help scale LOR software.

Well Don, know you will take this the wrong way!! But didn't know that you started this hobby in early 2005,, "started in this hobby in early 2005" is better said ;-)

I also use Teamviewer and the nice thing about you and hear your audio from your show machine :-)

have you try SanDevices website hope the new policy don't removed this post from public view.

You have reached your quota of positive votes for the day :-0 What Tim said Merry Christmas one and all.

don't know if this may help as I have my un-check

Thanks Bill for your friendship, help and memories. You will forever be missed, but never forgotten. for the ones that ever made to Bill & Nancy Home, I love the steam fire engine in there Home.

RIP Bill

I hope this was a Type-o

I just check my chart and look it up, that doubling a 24-gauge wire results like it becomes a 22 gauge at leases max :-)

RIP BILL VANDERSLICE

May not be a joke! but Good!! Attached files