Jump to content

Kulpy

Members
  • Posts

    126
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by Kulpy

  1. I bought some floods this year, So I am trying to do some Halloween this year any help would be appreciate "I would like a copy sent to kakulp62@comcast.net I agree to not sell or share this sequence with anyone. This request will be used for my private, personal use on my show only. I also understand the mere fact of making changes to the borrowed sequence and pasting it in to my sequence does not make it mine to share". Thank You
  2. I am sharing 'Shine a Light' By Johnny & the Raindrops. Singing Faces
  3. I would like a copy sent to kakulp62@comcast.net "I agree to not sell or share this sequence with anyone. This request will be used for my private, personal use on my show only. I also understand the mere fact of making changes to the borrowed sequence and pasting it in to my sequence does not make it mine to share". Thank You Kulpy
  4. Thank You JR, Taking out the jumper fixed it. Can I still Run cat5 to next controller? I thought that is what the jumper did
  5. Thank You for the information. Grandkids just came over till tomorrow, so will not be able to work on till then. I will let you know if that works.
  6. I have a pixie 8, 12v and using 100 count square nodes. Some of my props I use have any where between 110 to 140. So when I add 35 pixels and I am in the HU the first 100 pixels work fine but the other 35 do not. As soon as I add the 35 the 35 all come on one color and can not turn them off and stay that color the hole time. But yet when I have the test mode on and set for 135 and test port 1 the 35 go to channel 2. so that means I have to use 2 channels for 135 pixels Channel 1, 100, Channel 2, 35. Is there not a way to have all 135 on one channel. I am running 12v Kulpy
  7. the first thing I would try is restarting your computer
  8. I have been only running one network for my show, Now my show is growing and I am adding pixels. Getting 1 line outside was not hard. I ran a line through my walls with a wall plate on the inside wall and outside soffit. Yes I can have 2 in that one box. But I do not know what to do with more lines. So my question would be when you guys are running more networks how do you get all the cables outside?
  9. Jr. What enclosure do you use that you can put the 2 power supply and pixie 8?
  10. Okay so the Plug-n-Show pixel package controller will work right? or should I build a controller? Thank You
  11. Trying to get this RGB stuff sorted out. If I have a pixie 8 12v system and have a window frame that has 136 pixels, how do I power the lights? I know the output can handle 100, just don't know what to do with the other 36. Is my only option to power inject? I am really trying to stay away from power injection. Then the other question would be, on the PixCon controllers can you put more then 100 pixels on a output with out power injection? Thank You
  12. I did that and still the same. I put in for a help ticket last night. Waiting for a response My scale is at 100% and the resolution is 1366x768 (Recommended
  13. I am getting into S5. So I downloaded the newest version, and now I am having a problem in the sequencer. When I am in it, I am missing some of the tool bar. This is only happening on my lap top. When I scroll over the area the tools show up,As you can see on the pic where it says play the entire sequence. But just not visible. Everything is there on my desk top. Any help would be appreciated. Thank You
  14. I am looking at the plug-n-show pixel package 12v. JR, I saw in another post you said to someone about adding another power supply to the controller. Do you have to do that? Thank You
  15. Okay, So i am getting into to pixels this year. My numbers below are 2" spacing Question 1 is, What is a good square pixel spacing on a house outline? And do they fit in a 3/4" J channel ? Question 2 is, from back soffit to peak is 93 pixels and peak to front soffit is 93 pixels then front soffit is 206 pixels, So my question is can I do 100 connection to port, 100 connection to port, 100 connection to port, 100 connection to port, with 8 left over. Everything I see is they put their connections like at the peak and corners. Question 3 is, does the 25' extensions take any power away from the pixels. I am sure I will have other questions but for now that is it. Thank for any advice
  16. "I would like a copy sent to kakulp62@comcast.net" "I agree to not sell or share this sequence with anyone. This request will be used for my private, personal use on my show only. I also understand the mere fact of making changes to the borrowed sequence and pasting it in to my sequence does not make it mine to share". Thank You
  17. "I would like a copy sent to kakulp62@comcast.net" "I agree to not sell or share this sequence with anyone. This request will be used for my private, personal use on my show only. I also understand the mere fact of making changes to the borrowed sequence and pasting it in to my sequence does not make it mine to share". Thank You
  18. "I would like a copy sent to kakulp62@comcast.net" "I agree to not sell or share this sequence with anyone. This request will be used for my private, personal use on my show only. I also understand the mere fact of making changes to the borrowed sequence and pasting it in to my sequence does not make it mine to share". Thank You
  19. Why can't you have the transmitter in the house? I have the one Mr.P is talking about, and mine is in the house on a window sill.
×
×
  • Create New...