Jump to content

TheSignGuy

Members
  • Posts

    45
  • Joined

  • Last visited

Everything posted by TheSignGuy

  1. $375 + shipping for floods and controller. I might be willing to split the floods up from the controller for the right price but would rather sell as a whole. Used 4 seasons. The floods sat on the painted Black PVC stands that are included. The controller is just how it arrived factory assembled by LOR with a 12V 200 watt power supply, it uses 1 - 120v grounded plug to power it all. I added extra wire leads to reach the specific places around the house. Ports 4,5,6,7 and 8 have soldered extension (10ft up to 30ft) pigtails with ports 1,2 and 3 have the normal 18" pigtails. Original LOR 4 wire connectors on both controller and floods, the floods have the unmodified 16ft LOR pigtails attached. If I can find the original instructions I will include them, NO cat5 cable, NO RS485 adapter included, NO software included. Buyer to pay actual shipping, everything is about 31lbs and will be shipped by FedEx Ground with tracking. Plug-n-Show - Includes floods, controller, power supply, enclosure. Controller and power supply mounted and wired in the enclosure A CMB24D V6 controller, wired and mounted in enclosure 8 - 10W Floods with16ft cable on each Flood High quality Power Supply ( extend temperature operating range ). UL listed Enclosure UL Recognized Power Supply Cables are numbered for easy connection
  2. Gawd... I thought it was 6 and I was an hour late... 🙄 🤣
  3. It keeps asking me for a pass code???
  4. Best place to mount it would be as close to the center with the shortest runs possible. Any idea what the pixel count will be on all that? I would guess that would determine how the strings will need to be broken up and wired. I see 12 different parts/objects/props that need to be outlined and I think there is a 170 pixel limit (with variables) per port on the Pixie 16. I assume you will be doing 12v pixels so I'm not sure how long the leads can go to exceed the 350 watt limit if using 1 PSU. My guess is you will need 2 350 watt PSU's to power all those pixels without issues? Take my input with a grain of salt, I'm far from an expert on pixels and still learning. What I would do is the layout (in your preview) on the house with the pixels first and then figure out what hardware you will need. I might be over thinking this but 2 Pixie 8's might work out better the the 1 Pixie 16.
  5. That's what I figured for the singing Santa, I'm in the upstate of SC close to Lake Hartwell. If you were closer would have picked it up.
  6. Does the singing Santa include the lights or just the coro?
  7. I missed the meeting, always looking for information to make things run smoother.... I think the "Zoom Room" a great idea and Mr. P has a good suggestion. Are these meetings being recorded or is there a way to go back and watch them like the VCS?
  8. Would love a copy as well thesignguy224@comcast.net Thanks for all you do guys, at some point I hope to be in a position where I can help and share as well. I agree to not sell or share this sequence with anyone. This request will be used for my private, personal use on my show only. I also understand the mere fact of making changes to the borrowed sequence and pasting it in to my sequence does not make it mine to share
  9. Got a spare RS485HS Adapter, 40 SPT-1 male female Vamp plugs, Pixie 4 and a Pixie 16. That payment issue almost got me, but I just went through paypal checkout after the 4th try and got what I wanted. If I didn't get it, I didn't get it... I think I saved $25 on the Pixie's.
  10. LOR is having their Mad Grab Sale this evening @ 9pm I doubt you will find it cheaper new. http://store.lightorama.com/secretsale.html
  11. @dibblejr and @k6ccc I really appreciate what you guys did for the VCS, thank you for your time and sharing. And thanks to LOR for all the prizes.
  12. I saw the post on FB although I'm not on there much any more, I get most of my info from forums like this one. I did happen to score a S5 upgrade on the VCS even though I'm already on S5 5.6.0 PRO, just happy I won SOMETHING lol! I grabbed a screen shot of the discount codes from the end of the VCS as well. I really had to hold back from ordering anything because I'm waiting on the Mad Grab Sale and like you I don't need any of those "looks" from the wife when my order arrives :)
  13. That's a pretty good deal at the 100 count, thanks for the info.
  14. Yes. I did try that but it brings them back in the preview and stacks the pixels on top of each other and they play but they do not assign them back to the arches. I'm going to try what KYHI suggested. I don't have a problem building a new preview but figured this issue is over my head for the lack of time I've spent in S5.
  15. Thank you for the reply. That's the general feeling that I'm getting is to start a new one. I did delete the old arches and try to add them with the old sequence but they would not run in the preview so i figured the error messages and unmatched channels were the issue but I was unable to find the problem.
  16. So I've made up my mind that I will learn S5, watched the tutorials and did not seem that difficult to catch on. I just upgraded to Pro to I could add some more pixels and motion effects into the display for next year. So the thing that has me scratching my head is when I imported my visualizer file for all my current channels my Pixie 8 was really messed up, all other AC channels were fine. I have 4 pixel arches, 60 pixels each and they are ribbons. I run 120 pixels on port 1 (60 pixels each arch) and 120 pixels on port 2. There are error messages and unmatched channels and for some reason it suppressed the first 14 pixels on port 1 of my pixie 8 (15.1 through 14) and will not add them to the sequencer. In the sequencer it also added some old CCP Pixie 2's I no longer use and will not show up in the preview so I can delete them? From what I've read it's best to build a new preview with my current configuration and add the arches there instead of trying to figure this out. Can anyone point me in the right direction or confirm just to rebuild the preview?
  17. It's just the S4 SE, I'm still on S4 so not sure of the S5 process. Just make sure your controller is set up (added) in the SE config like this: output 1 are pixels 1-50 arch 1, pixels 51-100 arch 2, and output 2 are pixels 1-50 arch 3, pixels 51-100 arch 4. Remember that each 100 pixel string is 1 LOR ID so you will need 2 consecutive ID numbers. Lets say you set your CCR to unit ID 15, that will control the first string of 100 pixels, so to control the second strip LOR will set the unit ID to 16 for the other 100 pixel strips. Once you have that set up you should be able to sequence the lights like my screen shot.
  18. So all you need to do in SE when you chase top to bottom just chase bottom to top. You dont need PE or SS to do this, it's pretty easy once you get the hang of it. Don't forget about the color fade tool to change the colors of the fade as well makes some neat effects when doing the chase.
  19. You will have to make a simple animation sequence and run it between the songs.
  20. So I'm trying to add 4 pixel arches, I just don't get how to make them in visualizer. Using only LOR S4.4.6 (no SS or PE) and I have a pixie 8 using 2 ports (1 and 2) my arches are ribbons at 60 pixels per arch each. So I have 120 pixels on port 1 and 120 pixels on port 2. When I go to add them with the "wizard" I can only get 50 pixels to show up, If I use the DMX option (where I can add 60 pixels) how do I config my channels to talk to SE using the RS485 adapter????
  21. Hey Jim, Looking for the HC Singing trees for S4 if you can thesignguy224@comcast.net Thanks!
  22. If you decide to separate I need a few but if you sell to lot I understand.
  23. depending on the price, sell me your extra bulbs 🤣 I have extra covers (with seals) and screws for the CCP's if you need to work out a little "deal"
×
×
  • Create New...