Jump to content

ESTRUGA Pedro

Members
  • Content Count

    26
  • Joined

  • Last visited

Everything posted by ESTRUGA Pedro

  1. Hello, I would like to know if among you, someone uses panels in P5 to make matrices with the software S5. I specify panel P5 leds SMD 2727. To know what kind of card it uses and if there are tutorials. I would like to work with these panels for Christmas 2020. See link for the matrix. https://fr.aliexpress.com/item/33008313692.html?spm=a2g0o.productlist.0.0.42cd30a6yEjAd9&algo_pvid=fd603f95-82ba-4704-90f0-f7b4a721f188&algo_expid=fd603f95-82ba-4704-90f0-f7b4a721f188-35&btsid=9a746238-d8cf-4f32-974a-12eb1f5ffa7d&ws_ab_test=searchweb0_0,searchweb201602_3,searchweb201603
  2. Thank you for your reply. Happy Christmas celebrations. cordially ESTRUGA Pedro
  3. Hello, I would like for 2020 to be able to drive P5 matrices, is this possible with S5? cordially ESTRUGA Pedro
  4. Thank you PhilMassey for your answer, on the side of Lightorama no noise for an algorithmic improvement to the file registration? cordially
  5. Hello, In my Show, I have music files that are between 250 and 300 MB, so I have a latency in reading 20 to 40 seconds between 2 music files, is there a solution to avoid this time out or everyone is in the dark? Cordially.
  6. Problem solved, thank you. Pedro ESTRUGA
  7. Hello, thank you for your answers, it's good 2 minutes and 26 seconds, I turned it into AVI file but S5 do not read it, file size in AVI 10 GB, I will turn it into wmv. cordially Pedro ESTRUGA
  8. Hello, Can we integrate a video of 2: 26.00 minutes in Avi format in S5? cordially Pedro ESTRUGA
  9. Hello, you need to connect your controllers on IP network and sector, then open SE then click Edit click on Network configuration and in the window that opens, on the right side you have Find Configure PixCon16, click it in the new window you must see your 2 cards PixCon16 click on a map, in the menu that opens give a new IP address to the card or keep his which should be 192.168.1.50 at least for me in France but I think it is the original IP address and put the card in DHCP so as to have a static IP address. Then inform the card on the number of pixels per output, the quality of the node (ws
  10. Hello, have you control in Network Cofiguration if the IP addresses and Protocol (port) not changed?, It happened to me after a computer shutdown, I reprogrammed everything and it became normal.
  11. Hello, I am under window 10 and S.E. 4.4.2 pro. At the beginning of my shows all went well and since 4 days some cards remain lit (CCR, PixCon Card) at the end of the show, is this due to a bug? cordially
  12. Thank you Don, I will compress all my sequences and give it a try. cordially
  13. Hello Don, Thank you for your reply. I have no problem with the sound, it is the file created by Sequence Editor which is large (413 476 KB) and when the Show is on the way, there is a dead time between 2 secances that can last up to at 45 seconds. Last year I had fewer pixels and my secances followed one behind the other. should I compress the lms files? cordially
  14. Hello, the files of my musical show are more and more voluminous because of the incorporation of many pixels, this translates into a dead time between each secance which can go up to the minute, is there a way solve this problem ? cordially
  15. Hi, I installed firmware version 1.09 and my CCR's work in 500k speeds. Cordially.
  16. Hello K6ccc, Thank you for your information, I have a lisence Pro 4.3.18 and a lisence 60 CCRs my problem came from the setting of the improved mode that was not validated. Thank you again and a good day to you. cordially Mr. ESTRUGA Pedro
  17. Re, In the Visualizer mode and Sequence Editor mode, the configuration is identical. In Pixel Editor my Tree 180 is configured in LOR mode. Everything works properly in normal mode. It's just that this year I wanted to add special effects with Pixel Editor and it does not work. I has 4 arches that run in DMX mode and I did not encounter problems in Pixel Editor. cordially Mr. ESTRUGA Pedro
  18. Hello Jim, In the Visualizer, the playback does not appear either. On the other hand my pixels in DMX mode work very well. Mr. ESTRUGA Pedro
  19. Hello, I created a Tree 180 with 12 CCRs Channel LOR in Pixel Editor and created effects are not visible in Sequence Editor. Can you help me ? cordially M. ESTRUGA Pedro
  20. Hi MattBrown, That's what I did, it works fine, thank you for your answers. Happy New Year. cordially ESTRUGA Pedro
  21. Hello Ikcubsurle, Thanks for your answer, how can you make loops in a sequence Pixel Editor imported into Sequence Editor, I do not know how to do. cordially
  22. Hello, Windows 7 Light-O-Rama Pixel Editor v4.3.16 Pro In Pixel Editor, I have a Grid timing of 220 Minutes. The sequence is only animation, I created 4 Fans and I copy sequences of 10 minutes one behind the other, but I can not go further than 160 minutes after this time, Pixel Editor is mistaken and I can not Migrate to Sequence Editor. Is there a length time not to be exceeded? cordially Estruga Pedro
  23. Hello, With current: LOR 4.3.14 Pro, SS license for 60 CCRs. LOR in Visualizer, I created 4 Arches kind of fan Segments 24 and 20 pixels per segment DMX. In SS I imported the 4 arches created with LOR View and created a musical sequence (X) I imported into S E. Visualization way everything works. Then I open Pixel Editor and I create my 4 arches I incorporate my sequence (X) then I add special effects I backup: Save Data Intensity. When I open and I S E incorporates the file (X) with: Save Data Intensity, the sequence that I created with SS is not correct see unreadable against the party cre
  24. Hi Brian, Thank you for your answer. This is of matrix 4 in vertical mode. Each of 24 strings and each string of 20 pixels. First pixel bottom left. I have not understood or translated your answer. I am sending you the attached file visualization that i did. Thank you in advance if you could provide a change. Best regards. ESTRUGA Pedro Essai cordons matrix 4_5_6_7 date_17-01-2016.lee
×
×
  • Create New...