Terpsmurf

Tow of my favorites that Greg and I collaborated on are the Pentatonix song for Jingle Bell Pop. The video can be seen here of Greg's sequencer file with his house design with my column sequence for the animated faces and the 24x50 matrix: https://youtu.be/PnTT4amAf8c The other is by Meghan Trainor for "I Believe in Santa. I did traditional faces to this one and the matrix, while Greg did the house design and the columns: https://youtu.be/4rrQRT5Q7cs

I have awoke on 2 occassions this week to my lights flickering randomly on multiple controllers. The first night at 2:00 am I just unplugged and killed the power to the first controller that connects to the computer/ I plugged back in the next afternoon and the flickering had stopped. However, again last night it started. This time I left the controller plugged in and disconnected the data feed to the controller. Again the flickering stopped. This is only happening to my units on the LOR network. The PixCon on the E1.31 is not flickering and suffering the same problem. I will again plug back in this evening when I get home from work to see what it is doing. Has anyone experienced the same problem, and can you point me in a direction to narrow down my culprit to resolve. I've never had this issue until this year. The only new addition to my show is a Pixie 4.

Thanks JR and Greg. I was able to get the prop created by using a picture of the holiday coro bulbs.

Not sure where to post this, but I am hoping someone has already sorted this out with S5. I have singing faces on the Standard LOR A/C controller with LEDs. In S5 when I import the Boscoyo Bulb and set up my strings and channels in the preview, how in the world do I get different colors for my mouth movements. Right now, for example, my singing bulb is orange, and I can only get the other parts of the bulb (including the mouth) to be orange. Is there a way to distinguish the different colors for each string? For example, LOR Unit 2, Channel 1- Orange; Unit 2, Channel 2, White; Unit 2, Channel 3, pink? Is this possible like it was in S4. This seems to be a simple an issue, but I can't find the answer. Thanks ahead of time. Daniel

I have 2 files I can send. What is the email address?

What song are you looking for? Chances are someone has it and will share.

What is a good email address to send you some sequence ideas

Here is a sequence for the music to "The Last Jedi" teaser trailer: YouTube Link of the visualizer file: https://www.youtube.com/watch?v=zQ06uQ2o48Y Here is the Dropbox File: https://www.dropbox.com/s/2bv5895z3fx45fp/Star Wars Last Jedi Teaser Trailer.lms?dl=0 The Music was purchased on Amazon from L'orchestra Cinematique. It is the teaser trailer music vesion, not the final cut trailer version. I purchased both, but I went with the shorter song because it has both the lightside and darksid music incorporated. The sequence is nothing special, but I just wanted to incorporate something from Star Wars since I have the complete Kurt Adler set in my display.

I have a new one almost finished, just have to figure out the last few seconds. It is from music I got off of Amazon for The Last Jedi Teaser trailer. I'll put it in a dropbox for anyone who wants it as soon as I finish the final little bit.

Email sent

Now sharing Noel by Hillsong Young & Free. My wife picked the song out since my song choice is a little more eclectic. Take a look at the visualizer and the Dropbox link is attached for anyone who wants it. DropBox: https://www.dropbox.com/s/1ygux79p06sooiq/Noel.lms?dl=0 Amazon Link for the version of the song used: https://www.amazon.com/Noel/dp/B017LIIHGC/ref=sr_1_3?ie=UTF8&qid=1508703267&sr=8-3&keywords=noel+hillsong+young+and+free

You got it Chris. Enjoy.

You've got mail.

I have it. Just finished in last month. I'll send it to you.

I am considering using lights and LOR in a float for a parade. I will only be using one controller, possibly just 8 channels, something simple. Can anyone suggest a decent power convert or quiet generator that is fairly cheap and can do the job.