Jump to content

XYrZbest

Members
  • Content Count

    26
  • Joined

  • Last visited

Community Reputation

0 Neutral

About XYrZbest

  • Rank
    New Forum User

Profile Information

  • Location
    United States
  • Occupation
    School

More About Me

  • Favorite Decorating Holiday?
    Christmas

LOR Software

  • LOR Software Version
    4.2.0
  • License Level
    Advanced
  1. so is it locked to motherboard? I assumed that once the key was used it wouldn't be allowed to be used again
  2. ok thankyou, I guess I should be grateful if I get my computer that crashed's license fixed and after that maybe I'll try and get a new license for my new laptop
  3. cool thanks, do you think I will have any trouble getting this resolved? I need this PC with the new HDD to have the software, but I'd also like to migrate my license from my old laptop to my new one, but I'm not sure how hard it will be.
  4. I've already used up all my other licenses on my main desktop, mini portable desktop, mac book in bootcamp, and my workshop PC. Yes I need all of these licenses because I edit and program shows, in my office, and workshop, as well as when I am editing something outside while looking at where effects will go. So I do need all 5 licenses. How can I go about retrieving my key and moving it?
  5. I guess i should have been more specific... PC -> ethernet -> E1.31 6 Port (DIYLEDExpress) -> Universe 1 -DMX/LOR Cross Over Cable> LOR CTB16PC (1) -Standard B Format Cat 5 Cable (From LOR) > LOR CTB16PC (2) -Standard B Format Cat 5 Cable (From LOR)> LOR CTB16PC (3) Universe 2 -> DMX Controller (1) -> DMX Controller (2) I tried them daisy chained of the USB controller and it worked... could it be some sort of handshaking between the boards... ? When it worked the one time I restarted it
  6. I have a 27 channel dmx controller for RGB floods as well and plan to add them to the E1.31 board i could not get them to work over E1.31 but they worked on DIP 10 for testing... I plan to redo the cable crimp because I think that is the issue
  7. I will try controller 2 individually I am using standard Cat 5 B format cables to connect to each controller (the ones that LOR sells)
  8. using 3 TCB16PCs on one universe and some rgb dmx stuff on the other channel. bridge was primarily for a network setup so I could control from multiple computers from anywhere in house as long as on network there is a led by the ethernet jacks on the controllers solid when getting data blinking when not but there is something plugged in
  9. My system goes as follows PC -> ethernet -> E1.31 6 Port (DIYLEDExpress) -> Universe 1 -> LOR CTB16PC (1) -> LOR CTB16PC (2) -> LOR CTB16PC (3) Universe 2 -> DMX Controller (1) -> DMX Controller (2)
  10. I've got my whole show set up i plugged in my first box and its playing over e1.31 i plug in the second to be daisy chained a the green light on the LOR box goes from solid green (receiving data) to blinking (not receiving data) Last night it did not work and then i restarted it and re plugged the wire back in and all 3 boxes worked, but it would flicker I then wiggled the cable and it went on and off, I realized that i had exposed the wires on my newly crimped cat 5 cable I made a new one plugged it in and it didn't work, I plugged the old one and it didn't work either but they both work on t
  11. I've got my whole show set up i plugged in my first box and its playing over e1.31 i plug in the second to be daisy chained a the green light on the LOR box goes from solid green (receiving data) to blinking (not receiving data) Last night it did not work and then i restarted it and re plugged the wire back in and all 3 boxes worked, but it would flicker I then wiggled the cable and it went on and off, I realized that i had exposed the wires on my newly crimped cat 5 cable I made a new one plugged it in and it didn't work, I plugged the old one and it didn't work either but they both work on t
  12. awesome I think my friend said that the cables get stiff, anyone know if that is true?
  13. there is probably about 1/2 in of snow on the ground, not too bad, but I want to setup my light show. one of my friends said that the extension cords will freeze if they get cold, is this true? can i set my show up in the snow? there is very little...
  14. I could have sworn i started this topic in LOR DMX not in General Decorating Questions what happened
  15. I thought i could just run the board as an ip on my network is this not possible, and if i make a seperate network can i use the wireless for one and the lan for the other and not add a 2nd card
×
×
  • Create New...