Jump to content

mking0310

Members
  • Posts

    23
  • Joined

  • Last visited

Everything posted by mking0310

  1. Thank you very very much. I changed the direction of the cat 5 cross over cable and now it works.
  2. I was using a cross over cable and I had the DMX side plugged into the controller, and the LOR side plugged into the LOR controller. But when I reversed it, it worked.
  3. Hello, I have 2 LOR's plugged into the DMX output of a Advatek PixLite 4 MKII via cat 5. When I plug the cat 5 into LOR #1 (with no other cat 5 plugged in ) the Status LED is solid. As soon as I plug in a CAT5 to LOR #1, with nothing connected on the other end of the Cat 5, the Status LED starts blinking. When I plug the cat5 into LOR #2, it continues to blink. I'm using a Cross over cable to connect the DMX output to LOR #1 and LOR #1 works as long as no other cat 5 is plugged in. I've tested with several different cords and I've tried making LOR #2 the first one plugged in but that doesn't change anything. Thank you dearly! Michael
×
×
  • Create New...