Jump to content


  • Posts

  • Joined

  • Last visited

Everything posted by cjcruz

  1. Thanks. I'm ok with using 2 PixCons. One universe per string. Makes it easy for me. I have a 3rd Pixcon for a pixel tree. Also 1 universe per string.
  2. Testing a new 24x50 Matrix sequence by HS. It looks terrific. The matrix I built is a little smaller 24x45. I built my frame and put tinted plexiglass in front to cut down on glare. Running 2 LOR PixCon16 and using SE to run the show. I like to see HS make other matrix sequences that goes with their 12CCR and 16CCRs. https://drive.google.com/file/d/0Bwkh5bbJ5UwWYjc2U0ZFdExDems/view?usp=sharing
  3. Pre-cut pegboard I bought from HD has has 24x47 holes 1 inch spacing. It works for now. Next year I'll look into pixel net or something else with 1" spacing. It's not a cost factor as much as size. I tested my 24x45 matrix. It looks good for this year. Now to decide which matrix sequences to buy from HS. https://drive.google.com/file/d/0Bwkh5bbJ5UwWZVM2ekRzcTFKQzA/view?usp=sharing
  4. Thanks for the input. I first did try to resize. Like you said it was taking hours to do. The 24x50 sheet from HS has a 1.9" spacing which makes the matrix about 4'x8'. That's big! 1" spacing is about 2'x4'. I can fit it almost anyplace in the yard. I got lucky. My frame has enough room where I can fit a row of pixels on top and one on the bottom. That would make my matrix 24x45. Going to see what that looks like. Next spring I can rebuild and make a 24x50. Maybe someone will sell a matrix sheet with 1" spacing by then.
  5. I'm building a 22x45 matrix. Made it from pre-cut sheet of pegboard Home Depot sells. Pixels are 1 inch center to center. So it's not too big or small and resolution is good from 10-15 feet away. Square pixels fits perfect. Also using 2 PixCon 16 controllers. All the matrix sequence on Holiday Sequence site are 24x50. How can I scale it down to fit mine better. I tried changing rows and pixel length in SuperStar but 2 rows on top gets cut off. If I can get 1 row on top and one on the bottom it would look much better. Also tried scaling in SuperStar and that didn't work. Must be something I'm not getting right. I'm also thinking of rebuilding my matrix and make it 24x50 but will have to wait for next year. Hopefully someone can steer me in the right direction. https://drive.google.com/drive/folders/0Bwkh5bbJ5UwWcTJUX0ZtaHJjZTQ?usp=sharing
  6. Add me to the list also please. Thanks cjcruz958@hotmail.com
  7. Posted by DevMike Sept 17 2014: We do not recommend extending the leads for Cosmic Color Bulbs, Pixels, or Ribbons. CCDs are digital devices - that means there is not just power running on the wires, but data as well. The timing signals sent across those wires have little room for tolerance and after about 6 feet this becomes a real issue. Best practice is to keep the controller as close to the Cosmic Color Device string as possible. This post may help you out: http://forums.lightorama.com/index.php?/topic/22738-replacement-4-pin-connector-for-ccr-to-controller/
  8. I'm sharing this sequence. If there's interest I'll post download link. 12 CCR tree sequence not included.
  9. I want to thank Dave T for his great work with CCR sequences. "Christmas This Year" has a special meaning to him. You have talent and made a lot of my neighbors and people who stop by very happy and they all appreciate your work. My display isn't the best or the biggest but it brings a lot of smiles. MERRY CHRISTMAS!! My youtube video to "Christmas This Year" (watch it in 1080p) My 2015 playlist which I'm adding to. https://www.youtube.com/playlist?list=PL8QPJacoV_JoIv3TnipXLb_qoOOsnCtyi
  10. I was lucky the 1st flood I bought had resistors. I took voltage readings before and after each resistor. After hacking flood light I took voltage reading again. They were very close to my original readings. My other 5 floods I bought didn't have resistors as they were built into the LED driver. I picked up those resistors on ebay. I'm not too familiar with the controller you want to use. It's looks like the max input is 24v. I wouldn't try to connect a 36v power supply to it. I like the LOR CMB24D. It's more plug n play plus I get support if needed. Next spring or summer I may try hacking a 50w flood. Probably higher voltage and would need a different controller.
  11. Thanks Tom and you're welcome. These are the resistors I used: http://www.ebay.com/itm/271809185073?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT http://www.ebay.com/itm/281631630561?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT 36V power supply: http://www.ebay.com/itm/High-Performance-36V-DC-9-7A-350W-Regulated-Switching-Power-Supply-36-Volt-/181633106482?hash=item2a4a2d4232:m:mQigIG2CAWys-oaPcfLyYiA Check your voltages before and after.
  12. I just posted info on modifying/hacking 30w floods you may be interested in. http://forums.lightorama.com/index.php?/topic/39001-30w-36v-rgb-flood-light-modification-and-controller/
  13. Two years ago I modified 10W flood lights I bought from Amazon. They worked but weren't bright enough since I have a street light across from my house. This summer I decided to try to modify 30W floods lights I saw on Amazon for about $32 each. I bought one and modified it using a 36V power supply, resistors, and Light O Rama CMB24D controller. I did turn down power supply to 32V since controller power max input is 30VDC 30A. I've tested it and ordered 5 more. They've been running in my display for over a week now without a problem. I've received two different version of flood lights from Amazon which are manufactured in China. I'm posting a link to pictures from my dropbox. Hope this helps out a few who are thinking of modifying 30W floods. Version 1: https://www.dropbox.com/sh/gm9gn5ub4sfz4dj/AAABPoCWLqzGCYZNFEgIVugYa?dl=0 Version 2: https://www.dropbox.com/sh/v725t60cvz3fv8c/AACyq-HBAeHDymh_Pdy6FA63a?dl=0
  14. Nice sequence! I'm liking the floods.Thank you for sharing.
  15. Hey Jeff very nice! Love that mega tree. Mine doesn't even come close to yours but here's what it looks like. A big thanks to Dave for the great job on the CCR sequence. https://www.youtube.com/watch?v=P6jELvva5MY
  16. Hope you had a great Christmas Dave! Finally found time to video and edit sequences I bought from you. People loved them.
  17. SPT2 gets my vote. Buy another controller during the next sale.
  18. Dave, my neighbors and friends are loving your sequences. You do great work.
  19. Just saw this one on HolidaySequence. com. One of my favorites. Thanks Dave. Looks great! I have to quickly add this one for this year. http://fast.wistia.net/embed/iframe/9xq62d12al
  20. All the ones I've purchased included the .lms file. Plus their prices are the lowest around.
  21. I'll take a copy James. Thank you. cjcruz958@hotmail.com
  22. Lights of Christmas preview: Thank you Dave for your great work with SuperStar and thanks Mateo for sharing your sequence. Visualizer lags a little. Looks good on SE. https://www.youtube.com/watch?v=X4m0NCkwQ1E
  23. It's a beautiful sunny 78 degree day in Phoenix. Love our winters. : )
  24. Light Of Christmas 12 CCR is completed and Dave is nice enough to let me be the 1st to purchase it. Lucky me. : ) Love all the animations. I like the Christmas message of the song. Great work Dave. You make it look so easy. Wish I had your talents. Sequence can be purchased at http://www.holidaysequences.com It's a must get for CCRs. http://player.vimeo.com/video/111327484
  • Create New...