rainyoregonchristmas

Chet, how many do you need? I have a source.

Yup, but building them in small batches. $45 plus shipping.

Had to crop all the fun stuff out to make it acceptable for file size. You guys probably can't even see the bacon now... but it's there....

Stupid attachments limit... who has 500K photos anymore anyway. Can't show you guys a photo of my sweet Bacon Scented-Bacon Themed Lotto ticket I enjoyed scratching... and I will not confirm nor deny licking it.

Look. My first post outside of the vendor folder in weeks... wait or is it months....

Sysco, drop me your email address in a personal message. I'll invoice you.

I will do international shipping, but will need to quote shipping separately from the presale. I'll need a finished jig boxed and weighed with your address to get a cost. For example, shipping to Australia was in the neighborhood of $40 U.S. last I checked.

Jig details: It's all aluminum except for the fasteners. The main body is made from 1/4" thick 2×2 inch "U" channel. So it's a real solid tool. The body is 14" long, and the interior diameter is 1.500" so it fits up to 1" pipe. The locating pins can be ordered as 12mm or 1/2" or both if you wish. The pins sit on a sliding carriage that can be locked in place at any desired location. This allows for custom spacings from 1" to 12". V shaped locating blocks keep the pipe centered in the jig. The V slots also allow for many different sizes of pipe to be u

It started off as a gift idea, then modified it, and then progressed to a full commercial product. There are dozens of happy lighters out there using these.

https://m.facebook.com/story.php?story_fbid=1069408286518635&id=418988341560636 It is that time of year again. I have started my presale for my Drill Jigs for PVC pipe. The jigs allow you to drill customers spaced holes in PVC pipe for your RGB 12mm bullet nose pixels. The presale will run through December with delivery in February. Jigs are $45 plus $13.45 shipping in the USA. International shipping is available, please message us so we can get an estimate for you. Full details and photos on our "Rainy Oregon Christmas" facebook page.

http://m.homedepot.com/p/Werner-Roofing-Safety-System-K211201/203907961. This is what I use. I had a builder do a install of some stainless steel roof anchors too. Three of them now on the peak of my house.

Crunch time Flash Sale!!! Get your aluminum RGB Candy Cane Spinner frames from us with our easy to use Rainy Pixel Clips included so you can quickly attach your bullet nose pixels without zip ties. AND... you won't get the blisters caused by pushing pixels into coro. For full details, go to our Facebook page. Link posted below. https://m.facebook.com/story.php?story_fbid=1040525606073570&id=4189883415606360

I've run LOR for several years, but just ran into an issue with the Hardware Utility. Every time I refresh the utility it changes my unit id's to 1,2,3, etc. I'm setting them to 2, 5, 9 and 1. But every time it runs, it resets them. One of the controllers even has a dial, but it resets that one to one, though it is actually set on the dial for 9. Is this a known issue?

I haven't gotten a message from you. I really am willing to help, but Christmas is coming fast. Let me know how I can help you.

Drop me a line on the Facebook page. I'm part way through this batch. I don't think I will be able to squeeze in another one before "Lights on" time, so if you are in need, get them now.