Jump to content

pyrodigy

Members
  • Posts

    47
  • Joined

  • Last visited

Everything posted by pyrodigy

  1. Hello @TheDucks Thank you for your response. I will do my best to answer for your questions. Mains voltage we use 220VAC 50/60 Hz. The bridge abouth 4.300 feet long and both eaves will be lightining. Each 30 feet or more lenght Colour section will controlled due to bridge lenght. Bright is most important thing in this matter, but not considered for now only i can say as much as it can. Also yes outdoor waterproof (ip65+) equipments need to be used. Scenario that i thought for DC controlled system; CMB24D RGB controllers + Led stripts + G3-MP3 ShowTime Director (with real-time clock) + Signal Repeaters..ext But In this system will cost much more than client's expected. Best Regards
  2. Hello Alan Thank you for your response. I have already did. But unfortunately helpdesk responded to me as not satisfactory
  3. Hello , My company currently planning a Cascade project on the bridge and client would like to add lightining within the project as well. Could you please provide me any suggestion which LOR products, RGB bulbs, RGB float or CCR will be suitable for this kind project ? Any help appricated. Best Regards Finished cascade will be look like that.
  4. Jim thank you for your reccomendation. I didnt aware this option. User manual page 190 t0 200 explain clearly. I will work on it in my future projects. What kind of trigger or circuit do you use ? User manual tells input number in the startup trigger option (page 193). I thing Triacs do not work as Relays, so how do you sort it out NO / NC trigger ? Does LOR controller send a command to LOR software ? By the way I wish LOR has got an DMX control / trigger option for online start up stage shows but unfortunately it has not got, maybe lor developers add it in the future Like this; http://forums.lightorama.com/index.php?/topic/32101-does-lor-show-editor-has-an-input-option/?p=295168
  5. Hi jim Could you please let me know your trick (if not a secret) how do you use and setup trigger while running directly with Light-O-Rama Sequence Editor (computer) ? I mean i am currently looking for a trigger to start a show while running direcly from a computer. Such a trigger to the Sequence Editor ! is it possible ?
  6. Ok mike. I will do that. To be helpfull this issue do i need to downgrade my version back to v4.0.38 sequently and test one by one to find out problem ?
  7. I ve just tested. Test1; Complately disconnected physical wires to the minidirector for the all 3 triggers, but no way. show starts immediately. Not wait for the triggers Test2; After powered on without sd card Yes It starts playing as soon as i put the SD card in. I ve got 2 seperate minidirectors and same issue happens for both of them
  8. I m checking right now. But as i stated in my first post there has not been this issue in my old version called v3.12.2 at the same wire setup Anyway after a test i will let you know. By the way i am using minidirector not director
  9. Hi Jim Do you use ShowTime Director or ShowTime miniDirector ??
  10. Hi I ve just upgraded my LOR v3.12.2 to v4.0.38 After i upload succesfully a squence to my minidirector then Mini director behaves as '' Plays anytime Powered'' even i selected triggered option ! Show start immediately when i powered to mini. There has not been this issue in LOR v3.12.2 Minidirector firmware; mDC_MP3_V4-22 Do i miss something ?
  11. Hi k6ccc and dgrant Thank you for your quickly responses. If i am not wrong you suggest external trigger such minidirector and G3-MP3 Director controllers have NO/NC trigger input option to start their interior shows. As you do it is not solution that i am looking for i am actualy looking for DMX input option directly control to the LOR S3 Software suite. For example; I am currently use Commercial Laser software which has an DMX input option.Thanks to this option i can able to control basic functions of this software with an external DMX Console via ENNTEC or ARTNET devices. So i can able to control all laser, light, stage effect systems...ext form single DMX controller. Best Regards
  12. Hi to all Does LOR Software has an remote input setup option to controled by external DMX or Midi controller ? I mean i would like to start, stop or pause LOR shows via external DMX controller. Such as DMX Console sends DMX command to the LOR editor and start it. If it has this kind of option could you please let me know how can i do this ? Best Regards Admin Note: Could you please move this topic to under the E1.31 - LOR S3 or appropriate section.
  13. Hi How can i able to find mDC-MP3 firmware Release Notes, such as mDC MP3 4-2 and mDC MP3 4-21 ? Thanks
  14. Dear Mr.Dan Could you please let me know that Delay is com resync issue has sorted out with Latest firmware version called mDC MP3 4-2 .lhx of Minidirector ? Best Regards
  15. Where can i see new minidirector's new firmware version which called mDC MP3 4-2 release notes on web page?
  16. LightORamaDan wrote: I will keep active this topic until LOR experts fix this com resynchronous problem of minidirector .
  17. Surfing4Dough wrote: Actualy In my application i designed a portable case which have multiple RJ45 outs, show trigger buttons, rf receiver to trigger shows, 12v battery to power minidirector,battery charger and so on. As i stated in my previous message i would like to protect to mini from Damp at the outdoor. I just wanted to write shows in to mini's sd card with some other practical interface method.
  18. Don Thank you for your promt reply. First way in my opinion is ; 1- Computer > USB Cable > Modified Memory Card Reader/Writer (Mount this to the case) 2- Modified Memory Card Reader/Writer > Sd card Extension cable > Minidirector Modified SD card reader/writer will both hold SD card and have out for Mini director. But i wish to use; Computer > USB Cable > USB to RS485 converter > Uart to SPI converter > Extension cable> connect to the Mini's Board For example this link is easly explain how to interface SD Card. So to use this or similar method to interface directly Computer with Mini's sd card easly if i can able to use Mini's pin headers. Sd card interface
  19. Hello Dear Experts In my outdoor shows i would like to mount my minidirector in to the waterproof case to protect from damp. To write shows to the SD card is not good practise to me for each time after mounted to the case! So; I would like to write shows to sd card through minidirector's Pinheaders which mounted on its own circuit board? or write to SD card with any formula which you suggest to me with out killing microcontroller ? Is it possible to use this method without using directly its own SD Card? Best Regards Volkan
  20. Dear Experts I wish to see this problem would sort out in the near future. Best Regards pyrodigy wrote:
  21. Hello BTA16-600W is the best part to replace old one. W prefix one has snubberless characteristic part of this triac. If you chose non-snubberless(standart) triacs, you can cause Unwanted turn-ons and voltage spikes when you use it. Best Regards Volkan Orville wrote:
  22. Hello Com resync problem still Valid. This Delay doesnt happen only at 19.2K Baud rate. Best Regards LightORamaDan wrote:
  23. Hi jim If i was there i would ask also LOR 3 announcement date to Mr. Dan at the Expo:) Any news abouth it? Volkan
  24. Hello Will LOR summer sale discount start in near futurue? Best Regards Volkan
×
×
  • Create New...