ed26105 Posted July 19, 2009 Share Posted July 19, 2009 OK, I ordered three of these and thought I would do a little work with the 2.3.8 software package before they arrive. (I am still planning to use RGB strings to see if I can produce various colors on a macro level.)When I add 157 channels, I don't find the CCR device available to select as the device for the channels.When I open hardware utility 2.3.8 Advanced, I don't see the CCR tab as mentioned in the user manual.What am I missing? Link to comment Share on other sites More sharing options...
cmoore60 Posted July 19, 2009 Share Posted July 19, 2009 I look for the software to be upgraded about the time the hardware starts shipping.It has not been said that the current version of software will support the CCR.Chuck Link to comment Share on other sites More sharing options...
daniel Posted July 21, 2009 Share Posted July 21, 2009 It sounds to me after reading through things here, that it is reconized as a 157 channel LOR controller.--Daniel L Link to comment Share on other sites More sharing options...
Christmas_time_karl_UK Posted July 24, 2009 Share Posted July 24, 2009 Ok anychance of the software update coming soon so that when the shipping starts my sequences will be ready to test just before the lights start!? Link to comment Share on other sites More sharing options...
Recommended Posts