Jump to content
Light-O-Rama Forums

Can more than one sequence be downloaded to a controller?


HowardShank

Recommended Posts

According to the LOR1602W Manual (http://lightorama.com/Documents/LOR160xW_Man_Web.pdf) page 34, it says,

• Sequences:
Multiple internal
sequences

According to the unreleased DIO32 manual (http://lightorama.com/Documents/DIO32_Man_Web.pdf) page , it says,
"If you are using a switch to activate a sequence
stored in the DIO32 controller, then Port A on the
controller must be configured for input. Each input
bit starts one of 8 internal sequences. The trigger
norm open/norm closed overrides the setting of the
port DIP switch."

Can more than one sequence be downloaded to a LOR1602W controller? If so, how?

Link to comment
Share on other sites

I spoke with Dan today.

A LOR 1602 controller can only accept a single sequence downloaded to the controller. The manual incorrectly indicates multiple internal sequences on page 34.

Although subject to change because it is not finalized yet, the DIO32 will be able to accept 8 sequences in the future.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
×
×
  • Create New...