Tonnette Posted April 25, 2020 Share Posted April 25, 2020 I am sure this has been asked and answered a million times, but I have been searching and can't seem to find what I am looking for. If someone could point me in the right direction - I would be happy to go to the post. First, I have I standard CTB16 controller for regular lights and a falcon controller for my RGB. If I use a motion - it will work with all my lights. If I choose r1c1 it will change it from red to green to blue. That is the only channel that it will let me manipulate. I obviously do not have something set up right to not be able to make any changes. What am I missing. I know that I have something set up wrong like I did the very first time that I tried to use 4 CTB16 controllers and had the channels wrong per unit. Using latest version of software pro edition. I feel like it is the fact that it says the DMX is only 1 channel....not sure how to change that. tried uploading screenshots here, but they were too big. I actually posted this in the wrong area originally...posted in DMX LOR and realized after that it said to post other hardware here. PropItem #Lights Bulb Dim/Curv Network Start/End Circuit No Carryover at this time Pixel Tree 1 RGB Pixels (RGB order) Square None DMX Univ 1 1 150 0 Pixel Tree 2 RGB Pixels (RGB order) Square None DMX Univ 2 1 150 0 Pixel Tree 3 RGB Pixels (RGB order) Square None DMX Univ 3 1 150 0 Pixel Tree 4 RGB Pixels (RGB order) Square None DMX Univ 4 1 150 0 Pixel Tree 5 RGB Pixels (RGB order) Square None DMX Univ 5 1 150 0 Pixel Tree 6 RGB Pixels (RGB order) Square None DMX Univ 6 1 150 0 Pixel Tree 7 RGB Pixels (RGB order) Square None DMX Univ 7 1 150 0 Pixel Tree 8 RGB Pixels (RGB order) Square None DMX Univ 8 1 150 0 Pixel Tree 9 RGB Pixels (RGB order) Square None DMX Univ 9 1 150 0 Pixel Tree 10 RGB Pixels (RGB order) Square None DMX Univ 10 1 150 0 Pixel Tree 11 RGB Pixels (RGB order) Square None DMX Univ 11 1 150 0 Pixel Tree 12 RGB Pixels (RGB order) Square None DMX Univ 12 1 150 0 Pixel Tree 13 RGB Pixels (RGB order) Square None DMX Univ 13 1 150 0 Pixel Tree 14 RGB Pixels (RGB order) Square None DMX Univ 14 1 150 0 Link to comment Share on other sites More sharing options...
LORAdmin Posted April 25, 2020 Share Posted April 25, 2020 Please don't post the same question in multiple forums. Original Post: http://forums.lightorama.com/topic/51934-control-at-channel-level/ Link to comment Share on other sites More sharing options...
Recommended Posts