Jump to content
Light-O-Rama Forums
Sign in to follow this  
Guest guest

Twinkle Problem

Recommended Posts

Guest guest

Hi,

There is new firmware available for the CTBxxD cards and the LORxxxW controllers. This should take care of problems with Twinkle where lights were "stuck" on or off.

You can get the firmware at http://www.lightorama.com ... Look under the "Support" tab.

Thanks,

Share this post


Link to post
Share on other sites
Guest guest

Ok...so how do we apply the upgrade? Do we just save the firmware file in the LOR folder? Do we have to select something when loading up the sequence editor? Sorry, there's just no instructions on it and I don't want to blow up my controllers by doing it wrong.

Share this post


Link to post
Share on other sites
Guest guest

Larry,

Save the file on the PC, and go into the hardware utility. Click the Firmware button at the bottom of the page. I am not sure if you need to do this for each controller.

Share this post


Link to post
Share on other sites
Guest guest

Yes save it on the PC. You may as well put it in the Light-O-Rama/firmware folder...

With the hardware utility you sould follows the three steps in the firmware section.

Select the unit you want to update in the refresh list at the top.

Step 1: click the button ( Selected from units listed above)

Step 2: Select the firmware file

Step 3: Click download



There is some help on Firmware in the LOR help file. If you search on firmware you will find a description.... It does not cover downloading new versions from online and what to do with those version.

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.
Sign in to follow this  

×
×
  • Create New...