Visualizer Matrix Config

[scodavis]

Good morning,

I need assistance building a Visualizer fixture.  Here are the basic parameters:

LOR S4 Version 4.4.4 (Newest Version)
Matrix:  83 wide by 18 tall (I am using these numbers because I am changing an existing coro Tune-In Sign)
Hardware:  PixCon16 with 16 x 100 bullet pixels.  I will be using 15 of the 16 outputs where each output is one DMX universe.

First pixel will be at upper left of matrix.  I will then go in a horizontal zig zag pattern, using all 100 pixels for each output.  This is a complete list of what it will look like:

Row 1 - Left to Right, DMX Universe 1 Pixels 1-83
Row 2 - Right to Left, DMX Universe 1 Pixels 84-100, Universe 2 Pixels 1-66
Row 3 - Left to Right, DMX Universe 2 Pixels 67-100, Universe 3 Pixels 1-49
Row 4 - Right to Left, DMX Universe 3 Pixels 50-100, Universe 4 Pixels 1-32
Row 5 - Left to Right, DMX Universe 4 Pixels 33-100, Universe 5 Pixels 1-15
Row 6 - Right to Left, DMX Universe 5 Pixels 16-98
Row 7 - Left to Right, DMX Universe 5 Pixels 99-100, Universe 6 Pixels 1-81
Row 8 - Right to Left, DMX Universe 6 Pixels 82-100, Universe 7 Pixels 1-64
Row 9 - Left to Right, DMX Universe 7 Pixels 65-100, Universe 8 Pixels 1-47
Row 10 - Right to Left, DMX Universe 8 Pixels 48-100, Universe 9 Pixels 1-30
Row 11 - Left to Right, DMX Universe 9 Pixels 31-100, Universe 10 Pixels 1-13
Row 12 - Right to Left, DMX Universe 10 Pixels 14-96
Row 13 - Left to Right, DMX Universe 10 Pixels 97-100, Universe 11 Pixels 1-79
Row 14 - Right to Left, DMX Universe 11 Pixels 80-100, Universe 12 Pixels 1-62
Row 15 - Left to Right, DMX Universe 12 Pixels 63-100, Universe 13 Pixels 1-45
Row 16 - Right to Left, DMX Universe 13 Pixels 46-100, Universe 14 Pixels 1-28
Row 17 - Left to Right, DMX Universe 14 Pixels 29-100, Universe 15 Pixels 1-11
Row 18 - RIght to Left, DMX Universe 15 Pixels 12-94

Pixels 95-100 of Universe 15 Not Used
Universe 16 Not Used

Can anyone assist me with building a Visualizer S4 Prop with these parameters?

-Scott

[ItsMeBobO]

Pixel packing like this is not supported very well.    I will create it for you.   hold tight, it will take a couple hours. 

[ItsMeBobO]

sent link via pm