Jump to content
Light-O-Rama Forums
Sign in to follow this  
Poodleman61

Building a Matrix:

Recommended Posts

Im New to LOR. I used the Software with An AC Controller last year. Now Ive gone and Bought a Bunch of LOR Controllers (RGB) and a Bunch of Bullet pixels. Plus i Bought Matrix Webbings from Holiday Coro. I am Trying to build a matrix for my front window. 48" wide x 59" tall.2" on Center of the Webbings. Im trying to figure out (a) how many Strings of 50 Bullet Pixel it will take . (b) how much Power and amperage. and (c) How Many Control channels i will need . I have (2) PIXCON 16's and help with this would be greatly appreciated.

                                            Thank you in advance, Sincerely , Mark.

Share this post


Link to post
Share on other sites

Lots of ways to attack this.  My math says the matrix will be 24 nodes wide by 29 tall or 696 nodes(2088 channels).  You could do this with 12 outputs of the pixcon with 58 nodes each and a 320/350w power supply for each bank.  You can limit the intensity on the outputs and use 6 outputs of 116 nodes if you have 12v nodes.   You didn't mention the voltage?   Do you prefer connections on the top/bottom or sides?  

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...