Jump to content
Light-O-Rama Forums

Mean well 5V 30 Amp 150W power supply died


Rabeiler

Recommended Posts

Too bad you are not local, I have several spares.

Obvious thing if you are comfortable with a multi-meter is to test that you have line voltage on the input terminals.

If there is voltage I would unplug and it let it sit for a while.  If it has thermal limiter it might reset.  Of course if it comes it might indicate another failure (like the fan).

Link to comment
Share on other sites

12 hours ago, arnolddeleon said:

Too bad you are not local, I have several spares.

Obvious thing if you are comfortable with a multi-meter is to test that you have line voltage on the input terminals.

If there is voltage I would unplug and it let it sit for a while.  If it has thermal limiter it might reset.  Of course if it comes it might indicate another failure (like the fan).

Thanks. I have ordered a couple from digikey. I tested with multi before removing and confirmed it has ac. No fan in this model, I think the 12V ones have them.  I confirmed with a small 5V supply I have that the pixie8 seems to be okay. Hopefully the replacement arrives on Wednesday and opened a support ticket as well. 

Link to comment
Share on other sites

  • The topic was locked
Guest
This topic is now closed to further replies.
×
×
  • Create New...