Jump to content
Light-O-Rama Forums
Randall Huber

CCR controller issues

Recommended Posts

I have 12 ribbon CCR (original) tree.  When I fire up the Hardware Utility and test, 11 of the 12 ribbons light 3/4 of the way.  The 12th lights the whole length.  I can change the colors and effects fine.  Is there something I am missing? Also, when I played 1 of my sequences, nothing happened on the tree.

Share this post


Link to post
Share on other sites
1 minute ago, Randall Huber said:

Brain fart, I figured it out.

Please post what you figured out for future readers who may have the same issue.

Share this post


Link to post
Share on other sites

ok, i didnt have all the rgb channels in the console on in the hardware unit.  i moved the slide bar all the way ro incude all 50 pixels

Share this post


Link to post
Share on other sites
3 minutes ago, Randall Huber said:

ok, i didnt have all the rgb channels in the console on in the hardware unit.  i moved the slide bar all the way ro incude all 50 pixels

That's okay, a little embarrassment never hurts anybody, it happens to all of us.  😁

Share this post


Link to post
Share on other sites
2 minutes ago, Randall Huber said:

still cant get my CCR to play during a song.  any thoughts?

99% of the time when lights work properly in HU and not a sequence then it is a config issue. Also make sure you have control lights checked in SE.

Share this post


Link to post
Share on other sites
20 minutes ago, Randall Huber said:

still cant get my CCR to play during a song.  any thoughts?

Is this while playing the show from the show player or from the Sequence Editor?

 

Share this post


Link to post
Share on other sites

You said these are original CCRs.  Two thoughts.  Is the LOR network set for Enhanced mode?  If so, the CCRs firmware may need to be updated, and you need to have to LOR Control Panel running (which in turn, starts the Comm Listener).

 

Share this post


Link to post
Share on other sites

so i checked the network configuration and found that under aux network, (the one i use for ccr) under port tab, it said none.  this should be com 5 at 500k.  i checked the enhanced box.  

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...