Jump to content
Light-O-Rama Forums
JeffF

FS: Light-O-Rama CTB16PC controllers. (near Binghamton, NY)

Recommended Posts

I'm going to be listing a bunch of controllers here over the few weeks. I'll add more as I clear out my storage bins. All prices do NOT include shipping BUT I will help out and pay 1/2 the actual shipping. :) If you have any questions feel free to ask here or via private message.

NOTE: Some enclosures have been painted or partially painted black. They are in good physical condition needing only another coat of paint. :D

CTB16PC #4 - $135 OBO

Controller comes in LOR enclosure with LOR cords. It has two heavy duty power cords and the high capacity heatsinks. Pictures are here... https://photos.app.goo.gl/7LWfUARLLZrALQfm6

CTB16PC#10 - $100 OBO

Controller comes in CableGuard CG-1000 enclosure with a single heavy duty power cord and zip cord controller cords. Standard heatsinks only. Pictures are here... https://photos.app.goo.gl/F2t4oCbSmvPmXNaTA

CTB16PC#11 - $100 OBO

Controller comes in CableGuard CG-1000 enclosure with a single heavy duty power cord and extension cord controller cords. Standard heatsinks have been doubled up to help dissipate a little more heat than the standard heatsinks. Pictures are here... https://photos.app.goo.gl/FKZZm4QFZjFA3iGC7

CTB16PC#12 - $100 OBO

Controller comes in CableGuard CG-1000 enclosure with a single heavy duty power cord and zip cord controller cords. Standard heatsinks only. Pictures are here... https://photos.app.goo.gl/xSPuT2PhnTRdm4xS6

CTB16PC#13 - $100 OBO

Controller comes in CableGuard CG-1000 enclosure with a single heavy duty power cord and zip cord controller cords. Standard heatsinks only. Pictures are here... https://photos.app.goo.gl/Wi9or6L37271ikqJ6

Edited by JeffF

Share this post


Link to post
Share on other sites

do all the cat5 ports work?

 

Share this post


Link to post
Share on other sites
2 hours ago, ericm said:

do all the cat5 ports work?

 

They did when they were stored last year but I'll make sure they do before I send any out. I have a stash of spare ports here so any I think are questionable I'll just swap out.

Share this post


Link to post
Share on other sites

I can't tell on a couple pictures but these all look like Gen 1 or V1 controllers. Is this correct?

Tom

Share this post


Link to post
Share on other sites
7 hours ago, Maine Lights said:

What gen are these controllers 

 

1 hour ago, TBS99 said:

I can't tell on a couple pictures but these all look like Gen 1 or V1 controllers. Is this correct?

Tom

Not sure how to tell the difference between generations 1 and 2? Generation 3 is easy to spot since there are surface mount components and the layout is totally different. I'm pretty sure all the controllers I'll be listing are generations 1 and 2. If anybody knows an easy way to spot the difference let me know and I'll be sure to post that info too.

And I should have stated that I'll test all the channels and network ports before I send any controller out. I keep good notes on such things throughout the lighting season and make repairs as needed. I haven't had any controllers act up in a couple years but I'll double-check just to make sure. And honestly, if anything should ever go wrong with the controllers I sell I'd be happy to repair them. I can't fix a controller that totally burns up but a bad network port or a bad channel is easy to fix(you'd just have to pay shipping).

Share this post


Link to post
Share on other sites
5 hours ago, JeffF said:

Not sure how to tell the difference between generations 1 and 2?

Usually the board will say in the bottom center CTB16PC V1 for Gen 1 like in the picture for #4. #10 is a Gen 1.  #11 I cannot see the bottom completely due to wires covering it.  Same with #12 wire covering it.  #13 looks like V1 so that is also a Gen 1.

Tom

Share this post


Link to post
Share on other sites

All controllers listed in the first post are sold pending payment.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×