nightowl Posted June 26, 2018 Share Posted June 26, 2018 Hi all, Just purchased Madrix 5 Trying to control LOR controllers with the simple M2L settings but not having any luck with these two programs communicating my set up is P.C to Enttec open usb dmx then to 1 x 16 channel controller the madrix program is working on its own the LOR controller is working and controlling lights Join them together nothing Any Ideas I need help Link to comment Share on other sites More sharing options...
caniac Posted June 27, 2018 Share Posted June 27, 2018 what communication protocol are you using out of Madrix? LOR controllers understand DMX. Link to comment Share on other sites More sharing options...
zman Posted June 28, 2018 Share Posted June 28, 2018 (edited) I had an issue with M2L a few years back. Madrix had to be set up to know what output to monitor for that. However I am still in V3 Ensure Device Manager has your output set up and that WDM is selected with Use for M2L & S2L Effects checked. Edited June 28, 2018 by zman Link to comment Share on other sites More sharing options...
Recommended Posts