Jump to content
Light-O-Rama Forums

problem importing visualizer in S5

Recommended Posts


I have tried to import my visualizer file from lor    4.3.24 pro  to   S5. ( finally you will say ) On one prop I get an error. If I remove the prop it goes well. The prop contains 15 spokes with dumb rgb controlled by three CMBD 16. Exactly on the transition from controller A to controller B the error occurs.  Channel 16 of controller A is Red, channel 1 and 2 of the next controller are Green and Blue.   So in my humble opinion it could have to do with the  R   being on the first controller and the   G-B   on the second.  I included the prop in the files.

Please advice, if this will not work in S5 the hardware will have to be setup totally different to comply,  as the last 3 channels  46, 47, 48  are used in another prop  ( 3 x 16 channels, 3 CMBD16 ) All RGB channels are used on a few CMBD16, no spare left.

Thank you for your help.

Dick de Wit

The Netherlands



Edited by Trickyd

Share this post

Link to post
Share on other sites

Thanks for reporting this issue and providing the files!

I can see that it causes an error during the import. In the next beta release, the import will complete and report warnings for the 2 strings that cross unit numbers. Those 2 strings will be easily fixable by setting the Max Circuits value to 16 in Prop Definition.

Also, you could replace the Visualizer prop with a Fan prop in the S5 preview -- which would simplify things by having a single prop in the preview instead of 15 (1 for each string in the fan).


Share this post

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...