Jeffery m Posted December 7, 2017 Author Share Posted December 7, 2017 nevermind Link to comment Share on other sites More sharing options...
Jeffery m Posted December 7, 2017 Author Share Posted December 7, 2017 so when u say to open a new sequence and use master config am I using a existing sequence of mine or just the music and then fill in from my existing sequence lalater Link to comment Share on other sites More sharing options...
Jeffery m Posted December 7, 2017 Author Share Posted December 7, 2017 do I delete 8-10 on all my sequences Link to comment Share on other sites More sharing options...
dibblejr Posted December 7, 2017 Share Posted December 7, 2017 just select any song and then use the config you just saved. That was just so you don't accidentally delete your sequence. Once you are done rebuilding your new units then save that one as your new master config. JR Link to comment Share on other sites More sharing options...
dibblejr Posted December 7, 2017 Share Posted December 7, 2017 Just now, Jeffery m said: do I delete 8-10 on all my sequences No do not mess with your old sequences. You will copy paste from your old to new sequences as needed. Some may say something different but that works for me. I'm trying to keep it easy for you at this time. JR Link to comment Share on other sites More sharing options...
dibblejr Posted December 7, 2017 Share Posted December 7, 2017 When you open the "new sequence" with your config you saved it will not have a sequence on it. Just empty sheet with unit/ channel buttons that were on the sequence you used to export it. Link to comment Share on other sites More sharing options...
Jeffery m Posted December 7, 2017 Author Share Posted December 7, 2017 ok I opened a new sequence used a master config which I saved and just now deleted units 8-10 Link to comment Share on other sites More sharing options...
dibblejr Posted December 7, 2017 Share Posted December 7, 2017 Now right click on unit 7 channel 16 Insert device below select your device type "group" unit ID Network Regular or LOR OK you will see your unit built JR Link to comment Share on other sites More sharing options...
Jeffery m Posted December 7, 2017 Author Share Posted December 7, 2017 do I insert device above or below Link to comment Share on other sites More sharing options...
dibblejr Posted December 7, 2017 Share Posted December 7, 2017 below if you wish to keep consecutive Link to comment Share on other sites More sharing options...
Jeffery m Posted December 7, 2017 Author Share Posted December 7, 2017 what am I putting for name is that where I put 8.1 Link to comment Share on other sites More sharing options...
dibblejr Posted December 7, 2017 Share Posted December 7, 2017 Just now, Jeffery m said: what am I putting for name is that where I put 8.1 No you don't have to put those numbers You can put Mini Trees based off your config Link to comment Share on other sites More sharing options...
Jeffery m Posted December 7, 2017 Author Share Posted December 7, 2017 ok Link to comment Share on other sites More sharing options...
Jeffery m Posted December 10, 2017 Author Share Posted December 10, 2017 so I havent been able to test anything since its rained for 7 days straight here but I did go and make the master config like u said where I added a device above/below did it for all 10 controllers saved it and then took all my songs out of my show and replaced the ch. config on all of them with the new master config made new show and whala knoiwing changed still have over half of the lights not coming on or only coming on part of the time Link to comment Share on other sites More sharing options...
dibblejr Posted December 10, 2017 Share Posted December 10, 2017 (edited) Its difficult to resolve issues in the forums much easier on the phone. Your config probably is not correct and or your networks. Unless your controllers have other problems. Just to many variables that can be/ go wrong on forum. JR Edited December 10, 2017 by dibblejr Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now