Jump to content
Light-O-Rama Forums
dkunesch

Here we go again pixlite16

Recommended Posts

I just don’t get it. I have ran E1.31for a few years now with this controller with no issues and now again no output to the lights. I set the IP address a 192.168.0.10. I set the controller at 192.168.0.50 static. I run a test in Advatek assistant and the RGB strip performs as the test indicates. I build the show in LOR and enable it. The control lights is checked. The LOR box activated the lights as it should through the USB 485 adapter but the E1.31 does nothing. I ping the 192.168.0.10 and it sends and receives 4 packets. I remember having this problem the first time I started using E1.31 and stumbled on the fix by accident but I can’t for the life of me do it again. I am almost certain it has something to do with the ip addressing. Any suggestions?

Share this post


Link to post
Share on other sites

Do you have the LOR control panel running (which in turn starts the Comm Listener)?

 

Share this post


Link to post
Share on other sites

Have you check your network preferences and matched the ip address to the universes? Then click on the ipaddress and set the unicast or multicast?

Share this post


Link to post
Share on other sites

Thanks for he replies. I found the issue and it was in fact in LOR’s network preferences. For some reason all the DMX protocol’s were gone. I reset them to specify my IP address and away it went!  But I do thank everybody for the quick support.  

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×