Wolffy Posted November 20, 2017 Share Posted November 20, 2017 I have a pixel issue I think. The graphic is not great, kind of recognizable but something off. Here's how I have it programed 4 universes Each universe has 3 ribbons labeled 1-150 151-300, 301 -450 I have them as RGB 50 pixels (the instructions said GBR) But when I look at the sequence editor it looks RGB. Any thoughts? Wolff Link to comment Share on other sites More sharing options...
BMurray Posted November 20, 2017 Share Posted November 20, 2017 What kind of smart controller ( alphapix, pixlite pixcon, etc....) are you using? Most if not all now have the option in it's interface to set up the color order of the ribbons or pixels so that it ouputs in the correct RGB order. Yes the SE will show RGB order as that's how it will output. So you when to do like I suggested above it plays like it's supposed to on the acutal ribbons Link to comment Share on other sites More sharing options...
Dennis Laff Posted November 21, 2017 Share Posted November 21, 2017 Did you do a test on your controllers to make sure colors are right if you got your ccr strips from Holiday Coro there probably not RGB pattern Link to comment Share on other sites More sharing options...
Recommended Posts