Matt T 0 Posted October 8, 2017 I get the following error: "Connection to the LOR control Panel has been lost" No Longer controlling lights. The control panel is running and the error will not clear. Thanks for your help Share this post Link to post Share on other sites
dibblejr 558 Posted October 8, 2017 Please fill out your profile to include your software version or at least post the version and more specifics. You may get more replies. Thank you JR Share this post Link to post Share on other sites
Matt T 0 Posted October 8, 2017 I am using 4.3.24 PRO. Last year I used a 16 AC controller with the basic software and everything was great. To enhance the display, I just bought the LOR plug and play pixel tree (pixie 8 controller). So connecting just the pixel tree, I cam control in with the hardware test, but cannot with the pixel editor. I did have the control panel running and set the network config according to the manual. I just don’t get what could be wrong. I am sure I messed up something somewhere. Thanks for your help Share this post Link to post Share on other sites
Dennis Laff 136 Posted October 8, 2017 Do you have the network that the pixie 8 controller is on, set in network preferences to enhanced. Share this post Link to post Share on other sites
Matt T 0 Posted October 8, 2017 Yes, in network config it is set to enhanced Share this post Link to post Share on other sites
SPaschall 31 Posted October 8, 2017 Close it down, open the control panel, open PE then make sure control lights is checked. SPaschall Share this post Link to post Share on other sites
Matt T 0 Posted October 8, 2017 Thanks to everyone. Reloading and restarting control panel and then pixel editor worked. Thanks again Share this post Link to post Share on other sites
