Jump to content
Light-O-Rama Forums

Pixel Tree Setup - Topper / Attach pixel strips


CampbellHouse

Recommended Posts

Bought a Pixie16 controller during the sale last year - Have been busy programming and sort of forgot about the actual setup. Wondering what most people use to setup their trees - topper, attaching pixie strips, creating base. I've been looking at Holiday Coro and Christmas Light Show and I'm just not sure which is better - or if there is a better one out there. I already have my pixels mounts on the pixel strips in my garage. Looking for some advise on this.

Also wanting to build some star flares - 5 channels on the pole / 3 for the stars - have them already programmed - they have some 3 channel stars on Christmas Light Show but I'm just not sure how I would attach to the top of a pole. These will be built using LED lights - controlled with a LOR 16 channel controller.

Any advice on either would be greatly appreciated.

image.png.afd527c57b35ebb2d6227e8e7e753fbd.pngimage.png.ef069477d84638f13199096fc1b7b7c4.pngimage.png.ff56ee98abae9ffd1f25e47618b3571b.png

Campbell House Lights

Link to comment
Share on other sites

I built a 12 foot tree using the kit from https://www.boscoyostudio.com/index.php?main_page=index&cPath=2_4. I used a steel pipe instead of the recommended fence pipe. I also used a three channel star from http://store.3glightingcreations.com/24-3-channel-star/'. It is threaded and will screw onto the pipe. It was super easy to assemble and raise by my self.

Link to comment
Share on other sites

  • The topic was locked
Guest
This topic is now closed to further replies.
×
×
  • Create New...