Jump to content
Light-O-Rama Forums

Glitch in copy and paste

Recommended Posts

Something seems to have changed between version 5.04 and 5.06 when it comes to copy paste and deleting.

My workflow is sequence all my props in SS. When I am done doing that I have 5 lms files. I bring the first part into the sequencer, import my channel config and delete all the existing effects. This is my first sign something has changed, I just select the entire grid and hit delete, this normally takes a few seconds. The sequence I am working on took about 15 seconds just to delete the effects.

Next I load part 1 as a new sequence and copy and paste between my now saved new sequence and part 1. I select my arches and spinners from part 1, this is 384 total pixels. This took about 30 seconds to copy and paste between the 2 seqeunces. In the past this few of pixels was a few seconds at best. 

When it came time to copy and paste my pixels tree, 16 x 50 pixels, forget it, this took minutes.

Anyways something changed. If you need any additional information just let me know.

Share this post

Link to post
Share on other sites

If you are copying entire rows, then copy/paste by time is much, much faster than copy/paste by cell. If you are copying between sequences, just make sure copy/paste by time is selected in both the source sequence and the destination sequence.




Share this post

Link to post
Share on other sites


I messaged you with a link to one of my sequences concerning this problem. Hope that was OK. Not sure if you were able to check it out yet.


Share this post

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...