Jump to content
Light-O-Rama Forums
interadx

27 Channel DMX Controller No Lights

Recommended Posts

interadx    0

I have hooked up everything, the following is what I have done.  I am using a Holiday Coro 27 channel dumb DMX controller, actidongle, LOR S4 software.  I have green flashing light on the controller.  I have the LOR software setup where the Network Preferences is recognizing the ENTTEC DMX USB Pro, when testing I turn the Control panel on, then open my sequence editor and start my song.  No RGB lights come on at all.  I have one RGB light connected through a dongle and the other is connected direct to the terminal.  Still I have no lighting.  Have tried rebooting, and starting everything again, but no success.  Shows on the Comm Listener DMX 1 DMX USB Pro Adapter opened.  Tried a new song and setup an RGB channel from scratch...don't know what I am missing.  By the way the Controller address is set to 1, using channel one.

Share this post


Link to post
Share on other sites
Dennis Laff    103

Do you have it set to universe 1 in network Preferances  in the sequencer editor do you have the channels setup as RGB.  

Edited by Dennis Laff

Share this post


Link to post
Share on other sites
Dennis Laff    103

you can do a test mode on controller with the dip switch to see if lights turn on , then you will know if controller works and narrow the problem down to channel configuration

Share this post


Link to post
Share on other sites
jerry72    103
20 minutes ago, interadx said:

Thanks, got it working...appreciate the help...

Post what ya did to fix it so others know.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×