Effect Generator Question

[Jade Rymkos]

I'm trying to repeat the same effect with the repeat mode set to "once_fit_to_duration" in two adjacent cells.  Is there any work around or way to disconnect the second cell from the first so that the effect will be repeated in the second cell?  I thought that I would be able to have the effect selected and use the fade down in the first cell, but PE still treats the two cells as a single zone/time period.

Thanks in advance for any tips or suggestions.

- Jade

[SPaschall]

It can be done you just need timing mark inbetween the two. It can literally be a micro second. Just something to divide them up.

SPaschall

Sent from my SCH-S968C using Tapatalk

[Little_b]

You can also do it by using both rows of the prop.  Set the effect for the time (cells) in the top row of the prop, then again in the second row of the prop for the next cell.

[SPaschall]

You can also do it by using both rows of the prop.  Set the effect for the time (cells) in the top row of the prop, then again in the second row of the prop for the next cell.

I didn't think about that, it should work like that also,

SPaschall

Sent from my SCH-S968C using Tapatalk

[MattBrown]

That's what I do - subsequent effect goes on the other row.