Jump to content
Light-O-Rama Forums
coachjc

Proper Config of Adding LOR Pixel Tree (16x25) Device Into Sequence Editor

Recommended Posts

If I'm trying to setup the Pixel Tree (16x25) if I were to go straight through the Sequence Editor. (ignoring the Pixel Editor)

Are These the correct settings?

(It seems to mostly work...I'm particularly interested in the "orientation" at the bottom...should string 2 (or even both strings) be marked as "flipped"?)

 

Thanks for your help!
(this is my 1st year sequencing/animating, and I'm super late with the final show with an unexpected biz trip early December...so any help is massively appreciated!)
:)

-- Jason
 

Capture.PNG

Share this post


Link to post
Share on other sites
6 hours ago, coachjc said:

If I'm trying to setup the Pixel Tree (16x25) if I were to go straight through the Sequence Editor. (ignoring the Pixel Editor)

Are These the correct settings?

(It seems to mostly work...I'm particularly interested in the "orientation" at the bottom...should string 2 (or even both strings) be marked as "flipped"?)

 

Thanks for your help!
(this is my 1st year sequencing/animating, and I'm super late with the final show with an unexpected biz trip early December...so any help is massively appreciated!)
:)

-- Jason
 

Capture.PNG

I did a massive amount of testing... (pretty much 6+ hours straight)

The above setup IS the correct setup if you're grabbing sequences from elsewhere and importing them directly into your Sequence Editor.

steps:

  1. Load the 3rd party sequence into SE.
  2. Highlight all tracks. (16 of them if you do it as shown above)
  3. Select "all rows".
  4. Copy (Ctrl-C)
  5. Go over to the sequence you're adding the 3rd party RGB tracks into.
  6. Select all rows.
  7. Paste (Ctrl-P)

That's it...it works like a charm!

Share this post


Link to post
Share on other sites

Just an FYI, when pasting you don't need to "Select All Rows" all you need to select is the first timing box of the first row where you intend to paste.

  • Like 1

Share this post


Link to post
Share on other sites

Hi, I have created my sequences with the Superstar add-on.  When I export the sequences into the Sequence editor, they will not play on the tree.  Any ideas. 

Share this post


Link to post
Share on other sites
5 minutes ago, Frank Bolton said:

Hi, I have created my sequences with the Superstar add-on.  When I export the sequences into the Sequence editor, they will not play on the tree.  Any ideas. 

Need more info such as controller being used, LOR network or E1.31.

Have you checked your channel config and network preferences?

Share this post


Link to post
Share on other sites

Thanks for the quick response.  As it turns out, it was the visualization that I created when I first got the new equipment.  I used the wrong controller numbers.  It is working now.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×