Changing from DMX to LOR

[brewers]

I was lucky enough to get a few shared sequences.  They are in DMX and I am running a pixie with 8 channels and 150 circuits per channel.

My question is:

Is there an easy way to swith the DMX channels to LOR besides changing each of the 1200 circuits individually?

[k6ccc]

Likely the easiest would be to create a blank sequence with the channels in the same order as the DMX file and channel configuration as your lights really are.  Then select the entire sequence from the original file, and paste into your new blank file.  It will likely take a while because I assume it would be a large file,but it should work.

 

[Steven]

Another way, which should be faster because it won't push large amounts of data through the clipboard, is to get the purchased sequence in the same place as your actual configuration, then use "Import Configuration".

[EmmienLightFan]

What do you mean "in DMX"?

The sequence editor doesn't care what output type they are.

 

Create your channel configuration, and then copy and paste the sequence from the DMX channels over to the new channels.