ctmcpeak700 Posted November 30, 2016 Share Posted November 30, 2016 I had this issue last year and cleared it up but here we go again. This year I'm running xLights and using a Falcon f16v2r to run my LOR controllers. I have been told that you don't need to make a crossover cable and I have also been told that you do. So I tried it both ways. No luck. So next I cut the Falcon controller out of the loop, and connected my USB-485 adapter and tried to find my controllers that way. Still no luck. Can anyone help me out here. BTW, when connected to the Falcon controller, the first LOR controller stops blinking and stays on steady like it has found the network but nothing else happens. The lights don't work and I still can't find that controller in the Hardware Utility. Link to comment Share on other sites More sharing options...
BlackwolfK9 Posted December 5, 2016 Share Posted December 5, 2016 If you take the first controller and connect it directly to the PC does it find it then. This year I had my USB485 adapter fail as well as a couple of comm chips in 2 controllers. Link to comment Share on other sites More sharing options...
Recommended Posts