Show Editor

[Rodney]

Can anyone give me a hand? I created my music sequences using the pixel editor, when I use the show editor to create a show it will play the music but the lights don't work. Any one know what I am doing wrong?

 

Thanks,

[k6ccc]

A couple thoughts.

1)  Since you used Pixel Editor, you MUST have the LOR network (or networks) set for enhanced mode.  Also note that an enhanced network will only work on newer Generation 3 controllers.  This page lists which controllers can handle enhanced mode:  http://www1.lightorama.com/network-speeds/

2)  Confirm that you can control the lights via the Hardware Utility and that the controller IDs are the way you sequenced them.

BTW, this made the assumption that you are using LOR networking and not E1.31 (since you did not specify).

 

[Rodney]

31 minutes ago, k6ccc said:

A couple thoughts.

1)  Since you used Pixel Editor, you MUST have the LOR network (or networks) set for enhanced mode.  Also note that an enhanced network will only work on newer Generation 3 controllers.  This page lists which controllers can handle enhanced mode:  http://www1.lightorama.com/network-speeds/

2)  Confirm that you can control the lights via the Hardware Utility and that the controller IDs are the way you sequenced them.

BTW, this made the assumption that you are using LOR networking and not E1.31 (since you did not specify).

 

Thank you so much, I will try this to see if it works.